Simulation of Excavator Bucket Pressuring Through Finite Element Method
Open Access
- 7 April 2018
- journal article
- research article
- Published by Ital Publication in Civil Engineering Journal
- Vol. 4 (3) , 478-487
Abstract
Excavator bucket tool is one of the most important parts of an excavator. It is made of steel mixture. It is commonly equipped with protruding teeth on its cutting side to breakdown hard materials and also to prevent dryness and damage of the bucket. Excavator bucket tooth must have supporting geometrical shape to penetrate and to endure the digging process on the ground, gravels, stones, or any other abrasive field. It is because of the field's natural characteristic when the bucket tool grinds the material. Mixed iron is common to be used as excavator bucket tool's material because it is easy to get and economic. High hardness value is also needed on the surface that transports hard material such as mining equipment. Therefore, an accurate analysis should be done to determine the suitable material on this field. Design and analysis were done by using Computer-Aided Engineering (CAE) Abaqus 6.10 application to get the maximum tension as the result of loading. Analysis process to get the tension was done by adding 8285.06 N weight forces in static condition with the angle of 32o to the horizon. From the analysis it could be known that maximum tension experienced by excavator bucket tooth is 209.3 MPa, and it is still below the Maximum Equivalent von Mises stress so the design could be categorized as safe.Keywords
This publication has 7 references indexed in Scilit:
- Digging performance characterization for hydraulic excavator considering uncertainty during digging operationProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017
- Analysis of contact forces of particles with excavator bucket in digging process by using discrete element method2016
- Analysis of Bucket Teeth of Backhoe Excavator Loader and its Weight OptimizationInternational Journal of Engineering Research & Technology, 2015
- Elastic and Elasto-Plastic Study for Bucket Tooth - Contribution to the Increase for Resistance of Collapse -Advanced Materials Research, 2013
- Reduction of wear via hardfacing of chisel ploughshareTribology International, 2006
- Materials selection to excavator teeth in mining industryWear, 2001
- Effect of Microstructure and Chemical Composition of Hardfacing Alloy on Abrasive Wear BehaviorJournal of Materials Engineering and Performance, 2000