Suitability of rapid chloride migration tests for determining the migration coefficient in mortars made from different novel binder types
Open Access
- 2 April 2024
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 75 (9) , 1173-1184
Abstract
The main cause of corrosion of reinforcing steel, especially in infrastructure structures, is the penetration of chlorides, which can lead to high corrosion rates at the reinforcement steel. A frequently used accelerated test method to evaluate the chloride penetration resistance of concrete and mortars is the rapid chloride migration (RCM) test. The test was initially developed for ordinary Portland cement (OPC) based materials and involves spraying an indicator solution onto split test specimens to determine the penetration depth of the chloride ions. The pore solution compositions of new types of binders differ from OPC‐based materials, which can affect the reaction of the indicator solution. To investigate the suitability of the RCM test, the chloride content in the depth of the color change was determined in mortars made from different types of novel binders. The results show that the test provides reliable results for the binder types with partial replacement of OPC by supplementary cementitious materials. For binder types without OPC, there is a deviation in the migration coefficient due to a differing chloride concentration that triggers the color change.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (416337623)
This publication has 23 references indexed in Scilit:
- Eignung des RCM‐Versuchs zur Bestimmung des Chloridmigrationskoeffizienten in Mörteln aus alternativen Bindemittelnce/papers, 2023
- Frosteinfluss auf den Chloridtransport in Beton ‐ Kennwertece/papers, 2023
- Corrosion behaviour of bare and galvanized steel in geopolymer and Ordinary Portland Cement based mortars with the same strength class exposed to chloridesCorrosion Science, 2018
- Calcined Clays for Sustainable Concrete2018
- Determination of the chloride diffusion coefficient in blended cement mortarsCement and Concrete Research, 2015
- Calculation of chloride concentration at color change boundary of AgNO3 colorimetric measurementCement and Concrete Research, 2011
- Hydration of calcium sulfoaluminate cements — Experimental findings and thermodynamic modellingCement and Concrete Research, 2010
- Obtaining progressive chloride profiles in cementitious materialsConstruction and Building Materials, 2005
- Precision of the Nordic test methods for measuring the chloride diffusion/migration coefficients of concreteMaterials and Structures, 2001
- Evaluation of the AgNO3 solution spray method for measurement of chloride penetration into hardened cementitious matrix materialsConstruction and Building Materials, 1993