Low-current interruption in SF6-alternatives
Authors:
Open Access
- 1 October 2017
- journal article
- Published by Institution of Engineering and Technology (IET) in CIRED - Open Access Proceedings Journal
- Vol. 2017 (1) , 286-288
Abstract
SF6 is used as an insulation and interruption medium in medium-voltage (MV) gas-insulated switchgear (GIS), but has a very high global warming potential. In recent years, several environmentally friendly (eco-efficient) alternatives have been explored, focusing on dielectric and thermal properties. The interruption of low currents in MV application is emerging as an important topic for equipment manufacturers and users. The reduced arc-quenching properties of the most prominent eco-efficient alternatives may require the use of vacuum interrupters for simple load current interruptions. However, this may not be a cost-effective solution and simpler interruption principles are desirable. In this study, low-current interruption in AirPlusTM, a mixture of dry air and the C5F10O fluoroketone as well as mixtures of CO2 and C5-FK was explored. The authors find that it is possible to achieve the E3 electrical endurance class (100 c/o) with a switch based on the puffer principle in AirPlus with a condensation temperature of −25°C, suitable for secondary distribution MV GIS. The chemical analysis of gas samples taken from the switchgear after 100 successful interruptions indicate only trace amounts of fluoroketone decomposition products.Keywords
This publication has 1 reference indexed in Scilit:
- ${\rm CO}_{2}$ as an Arc Interruption Medium in Gas Circuit BreakersIEEE Transactions on Plasma Science, 2013