Surface Pretreatment and Fabrication Technology of Woven Carbon Fiber Cloth Aluminium Alloy Matrix Composite
Authors:
- 1 April 2015
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 816, 3-8
Abstract
Carbon fiber is mainly distributed in the shape of short fibers and unidirectional fibers as the reinforcing phase in metal matrix composites, and it is seldom studied as woven-cloth shaped to reinforce the matrix. In this paper, the pretreatment and the surface metallization of the woven carbon fiber were studied. Besides, the casting experiment without external pressure was carried out under the application of magnetic field. The result shows that when burning about 45mins at 500°C in the atmospheric environment, the pretreatment can achieve the best result according to differential thermal analysis and weight-time variation curve. Meanwhile the surface wettability between the carbon fiber and the matrix is greatly improved after the surface treatment and at the same time the reaction between the carbon fiber and molten aluminium alloy matrix is necessarily avoided, and it can consequently achieve an excellent bonding between the woven carbon fiber and aluminium alloy matrix. The application of magnetic field also provides magnetic force to promote the penetration of the molten matrix into the carbon fiber bundles.Keywords
This publication has 11 references indexed in Scilit:
- Fabrication and mechanical properties of Cu-coatedwoven carbon fibers reinforced aluminum alloy compositeMaterials & Design (1980-2015), 2014
- Effects of Cu interlayer on the wettability of aluminum on carbonJournal of Alloys and Compounds, 2013
- Tribological characteristics of innovative Al6061–carbon fiber rod metal matrix compositesMaterials & Design (1980-2015), 2013
- Fabrication of carbon nanofiber reinforced aluminum alloy nanocomposites by a liquid processJournal of Alloys and Compounds, 2012
- Fabrication of aluminium composites reinforced with carbon fibres by a centrifugal infiltration processComposites Part A: Applied Science and Manufacturing, 2010
- Interface characteristics and mechanical properties of short carbon fibers/Al composites with different coatingsApplied Surface Science, 2009
- Improvement of interface between Al and short carbon fibers by α-Al2O3 coatings deposited by sol–gel technologyCeramics International, 2008
- Fabrication of continuous carbon fiber-reinforced aluminum–magnesium alloy composite wires using ultrasonic infiltration methodComposites Part A: Applied Science and Manufacturing, 2007
- Squeeze infiltration processing of nickel coated carbon fiber reinforced Al-2014 compositeJournal of Materials Science, 2006
- Microstructure and tensile properties of 2014 Al alloy reinforced with continuous carbon fibers manufactured by gas pressure infiltrationMaterials Science and Engineering: A, 2005