A Comprehensive Model for Predicting Profile Exit Temperature of Industrially Extruded 6063 Aluminum Alloy
- 31 January 2011
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 26 (2) , 193-201
Abstract
The effects of extrusion parameters on the resulting profile exit temperature of industrially extruded 6063 aluminum alloy have been studied using statistical design of experiments (DOE). Two operating parameters (initial billet temperature and ram speed) and three geometrical parameters (extrusion ratio, profile average thickness, and number of die cavities) were investigated. A statistical model was obtained for predicting profile exit temperature with very close agreement between predicted and measured values. Present results indicated that the main contribution towards profile exit temperature comes from plastic work promoted by high extrusion ratios, high initial billet temperatures, and high ram speeds. Further contributions are promoted by parameters affecting friction and redundant work components. In addition to single-factor effects, profile exit temperature was revealed to be affected by a set of complex two-factor and three-factor interactions between the different operating and geometrical parameters. The most remarkable two-factor interactions were shown to exist between extrusion ratio and number of die cavities and between initial billet temperature and ram speed. Complex three-factor interactions have been shown to exist between extrusion ratio, initial billet temperature, and ram speed. These interaction effects are quantified in the present model and are further qualitatively discussed in terms of their effects on the resulting profile exit temperature.Keywords
This publication has 23 references indexed in Scilit:
- Extrusion of 7075 aluminium alloy through double-pocket dies to manufacture a complex profileJournal of Materials Processing Technology, 2009
- FEM simulation of aluminium extrusion through two-hole multi-step pocket diesJournal of Materials Processing Technology, 2009
- Thermomechanical modeling and simulation of aluminum alloy behavior during extrusion and coolingJournal of Materials Processing Technology, 2009
- A study on the re-solution heat treatment of AA 2618 aluminum alloyMaterials Characterization, 2007
- Investigation of extrusion ratio effect on mechanical behaviour of extruded alloy AA-6101 from the billets homogenised-rapid quenched and as-cast conditionsJournal of Materials Processing Technology, 2005
- Application of finite element method in the hot extrusion of aluminium alloysMaterials Science and Engineering: A, 2004
- Computer simulated and experimentally verified isothermal extrusion of 7075 aluminium through continuous ram speed variationJournal of Materials Processing Technology, 2004
- Prediction of temperature evolution during the extrusion of 7075 aluminium alloy at various ram speeds by means of 3D FEM simulationJournal of Materials Processing Technology, 2004
- Investigation extrusion ratio effect on mechanical behaviour of extruded alloy AA-6063Journal of Materials Processing Technology, 2003
- Analysis of forming loads, microstructure development and mechanical property evolution during equal channel angular extrusion of a commercial grade aluminum alloyJournal of Materials Processing Technology, 2003