High-Strength Behavior of the Al0.3CoCrFeNi High-Entropy Alloy Single Crystals
Open Access
Abstract
The main disadvantage of fcc (face-centred cubic lattice) high-entropy alloys is the low stress level at the yield point (σ0.1) at a test temperature above room temperature. This restricts their practical application at high test temperatures from 773 K to 973 K. In this study, we found that a high stress level was reached at the yield point σ0.1 ≈ G/100–G/160 (G is the shear modulus) of the [001]- and -oriented crystals of the Co23.36Cr23.29Fe23.80Ni21.88Al7.67 (Al0.3CoCrFeNi) high-entropy alloy (HEA) within a wide temperature range of 77–973 K under tension, due to the occurrence, of nanotwins, multipoles, dislocations under plastic deformation at 77 K and the subsequent precipitation of ordered L12 and B2 particles. It was shown that grain boundaries are not formed and the samples remain in a single-crystal state after low-temperature deformation and subsequent ageing at 893 K for 50 h. Achieving a high-strength state in the Al0.3CoCrFeNi HEA single crystals induces the orientation dependence of the critical resolved shear stresses (τcr) at T ≥ 200 K (τcr > τcr[001]), which is absent in the initial single-phase crystals, weakens the temperature dependence of σ0.1 above 573 K, and reduces plasticity to 5–13% in the orientation and 15–20% in the [001] orientation.
Keywords
Funding Information
- Russian Science Foundation (No. 19-19-00217)
This publication has 25 references indexed in Scilit:
- Orientation and temperature dependence of a planar slip and twinning in single crystals of Al0.3CoCrFeNi high-entropy alloyMaterials Science and Engineering: A, 2018
- Formation of ultrafine-grained microstructure in Al 0.3 CoCrFeNi high entropy alloys with grain boundary precipitatesMaterials Letters, 2017
- Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloyMaterials Science and Engineering: A, 2017
- High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperaturesActa Materialia, 2017
- Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloyActa Materialia, 2016
- Dynamic strain aging of Al 0.3 CoCrFeNi high entropy alloy single crystalsScripta Materialia, 2015
- Temperature dependencies of the elastic moduli and thermal expansion coefficient of an equiatomic, single-phase CoCrFeMnNi high-entropy alloyJournal of Alloys and Compounds, 2015
- A fracture-resistant high-entropy alloy for cryogenic applicationsScience, 2014
- Microstructures and properties of high-entropy alloysProgress in Materials Science, 2014
- The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloyActa Materialia, 2013