Investigation of the temperature oscillations in the cylinder walls of a diesel engine with special reference to the limited cooled case
- 4 June 2004
- journal article
- research article
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 28 (11) , 977-1002
Abstract
This work investigates the interesting phenomenon of the temperature (cyclic) oscillations in the combustion chamber walls of a diesel engine. For this purpose, a comprehensive simulation code of the thermodynamic cycle of the engine is developed taking into account both the closed and the open parts of it. The energy and state equations are applied, with appropriate combustion, gas heat transfer, and mass exchange with the atmosphere sub-models, to yield cylinder pressure, local temperatures and heat release histories as well as various performance parameters of the engine. The model is appropriately coupled to a wall periodic conduction model, which uses the gas temperature variation as boundary condition throughout the engine cycle after being treated by Fourier analysis techniques. It is calibrated against measurements, at various load and speed conditions, from an experimental work carried out on a direct injection (DI), naturally aspirated, four-stroke, diesel engine located at the authors' laboratory, which has been reported in detail previously. After gaining confidence into the predictive capabilities of the model, it is used to investigate the phenomenon further, thus providing insight into many interesting aspects of transient engine heat transfer, as far as the influence that engine wall material properties have on the values of cyclic temperature swings. These swings can take prohibitive values causing high wall thermal fatigue, when materials of specific technological interest such as thermal insulators (ceramics) are used, and may lead to deterioration in engine performance. Copyright © 2004 John Wiley & Sons, Ltd.Keywords
This publication has 19 references indexed in Scilit:
- Modelling the transient heat transfer in the ceramic combustion chamber walls of a low heat rejection diesel engineInternational Journal of Vehicle Design, 1999
- Components heat transfer studies in a low heat rejection DI diesel engine using a hybrid thermostructural finite element modelApplied Thermal Engineering, 1998
- Development of cumulative and availability rate balances in a multi-cylinder turbocharged indirect injection Diesel engineEnergy Conversion and Management, 1997
- Study of the steady and transient temperature field and heat flow in the combustion chamber components of a medium speed diesel engine using finite element analysesInternational Journal of Energy Research, 1996
- Prechamber and main chamber insulation effects on the performance of an IDI diesel engine coupled to power turbineHeat Recovery Systems and CHP, 1992
- Influence of ambient temperature and humidity on the performance and emissions of nitric oxide and smoke of high speed diesel engines in the Athens/Greece regionEnergy Conversion and Management, 1991
- Effect of combustion chamber insulation on the performance of a low heat rejection diesel engine with exhaust heat recoveryHeat Recovery Systems and CHP, 1989
- Internal-combustion engine heat transferProgress in Energy and Combustion Science, 1987
- Turbocharging the Internal Combustion Engine1982
- Heat Transfer in the Cylinders of Reciprocating Internal Combustion EnginesProceedings of the Institution of Mechanical Engineers, 1963