Self-Oscillation-Based Frequency Tracking for the Drive and Detection of Resonance Magnetometers
Open Access
Abstract
This paper reports a drive and detection method for Micro-Electro-Mechanical System (MEMS)-based Lorentz-force resonance magnetometers. Based on the proposed MEMS magnetometer, a drive and detection method was developed by using self-oscillation to adjust the mismatch between the mechanical resonance frequency and the coil drive frequency as affected by temperature fluctuations and vibration amplitude changes. Not only was the signal-to-noise ratio enhanced by the proposed method compared to the traditional method, but the test system automatically reached resonance frequency very rapidly when powered on. Moreover, the linearity and the measurement range were improved by the magnetic feedback generated by the coil. Test results indicated that the sensitivity of the proposed magnetometer is 59.6 mV/μT and its noise level is 0.25 μT. When operating in ±65 μT, its nonlinearity is 2.5‰—only one-tenth of the former prototype. Its power consumption is only about 250 mW and its size is only 28 mm × 28 mm × 10 mm, or about one-eighth of the original sensor; further, unlike the former device, it can distinguish both positive and negative magnetic fields. The proposed method can also be applied in other MEMS sensors such as gyroscopes and micromirrors to enhance their frequency tracking ability.Keywords
This publication has 33 references indexed in Scilit:
- A Sub-400-nT/ $\sqrt {\text {Hz}}$ , 775- $\mu \text{W}$ , Multi-Loop MEMS Magnetometer With Integrated Readout ElectronicsJournal of Microelectromechanical Systems, 2015
- Force-rebalanced Lorentz force magnetometer based on a micromachined oscillatorApplied Physics Letters, 2015
- Extended Bandwidth Lorentz Force Magnetometer Based on Quadrature Frequency ModulationJournal of Microelectromechanical Systems, 2014
- Three-Axis Lorentz-Force Magnetic Sensor for Electronic Compass ApplicationsJournal of Microelectromechanical Systems, 2012
- A 3D micromechanical compassSensors and Actuators A: Physical, 2007
- Resonant Magnetic Field Sensor With Frequency OutputJournal of Microelectromechanical Systems, 2006
- Optical readouts of cantilever bending designed for high magnetic field applicationIEEE Transactions on Magnetics, 2003
- Resonant mechanical magnetic sensor in standard CMOSIEEE Electron Device Letters, 1998
- Integrated resonant magnetic-field sensorSensors and Actuators A: Physical, 1994
- Integrated magnetic field sensorSensors and Actuators A: Physical, 1991