Leather waste valorization as solid fuel for thermal energy
Open Access
- 15 May 2025
- journal article
- Published by Centro Universitario de Maringa in Revista em Agronegócio e Meio Ambiente
- Vol. 18, e12909
Abstract
Solid waste is an attractive renewable resource for thermal energy systems in the effort to reduce greenhouse gases(GHG) emissions globally. Footwear industries play a significant role in many countries, and generate a huge amount of LeatherSolid Waste (LSW) in forms of scraps and losses as strips, sides, or edges, powdered or compacted. The objective of this workwas to investigate the characteristics of LSW, originated in footwear industries, as it serves as a solid fuel that can be convertedinto thermal energy. Experimental tests for evaluation of solid fuel characteristics included proximate and ultimate analysis, highheating value, bulk and energy density, and also the particle size distribution. The bulk and energy density achieved were low(110 kg.m-3and 2 GJ.m-3, respectively), and densification could provide a more interesting solid fuel. The LSW has characteristicssimilar to biomass, particulary in terms ofvolatile matter (76%)and fixed carbon (17%) on a dry basis, and for hydrogen/carbon(H/C) and oxygen/carbon (O/C) ratios in the same magnitude asEucalyptuswood. The high ash content (7%) demands the sameoperational care in thermal equipment, as in sugarcane bagasse combustion.The achieved moisture of 12% showed that it doesnot require artificial drying for combustion.LSW has a goodhigh heating value(HHV), of approximately 20 MJ.kg-1, which ishigher compared to typical biomasses such as sugarcane bagasse or agricultural residues. All the relevant characteristics forthegood quality of a solid fuel are present in the evaluated LSW.Keywords
This publication has 23 references indexed in Scilit:
- Influence of comminution and briquetting parameters on the agglomeration behaviour of wheat strawBiomass and Bioenergy, 2024
- Essential basics on biomass torrefaction, densification and utilizationInternational Journal of Energy Research, 2020
- Liberation and recovery of Cr from real tannery sludge by ultrasound-assisted supercritical water oxidation treatmentJournal of Cleaner Production, 2020
- An overview of chromium removal techniques from tannery effluentApplied Water Science, 2020
- Investigation on pyrolysis and incineration of chrome-tanned solid waste from tanneries for effective treatment and disposal: an experimental studyEnvironmental Science and Pollution Research, 2019
- Emission characteristics for co-combustion of leather wastes, sewage sludge, and coal in a laboratory-scale entrained flow tube furnaceEnvironmental Science and Pollution Research, 2019
- Time-dependent effect of composted tannery sludge on the chemical and microbial properties of soilEcotoxicology, 2017
- Solutions for energy recovery of animal waste from leather industryEnergy Conversion and Management, 2017
- Thermogravimetric analyses of co-combustion of plastic, rubber, leather in N2/O2 and CO2/O2 atmospheresEnergy, 2015
- A correlation for calculating HHV from proximate analysis of solid fuelsFuel, 2005