Evaluation of Multi-Crop Biofuel Pellet Properties and the Life Cycle Assessment
Open Access
- 16 July 2024
- journal article
- research article
- Published by MDPI AG in Agriculture
- Vol. 14 (7) , 1162
Abstract
Although wood biomass is mostly used to produce solid biofuel pellets, it is important to evaluate the possibilities of using other types of biomass as well. It is not only important to obtain biofuel pellets of suitable quality but also to ensure a sustainable process of producing and using these pellets for energy production. This paper presents an evaluation of the quality characteristics of seven different biofuel pellets made from multi-crop plants (fibrous hemp, maize, and faba bean) and a life cycle assessment (LCA) of the heat production by burning these pellets. The physical-mechanical properties and elemental composition of the pellets are determined according to international standards, as indicated in the methodology section. The LCA was performed using the SimaPro 9.5 software. The complete life cycle from cradle-to-grave is assessed, i.e., from growing plants to spreading ash obtained from pellet burning. An analysis showed that in most cases the produced pellets met the requirements of the standard ISO 17225-6:2021. The lowest negative environmental impact associated with the production of 1 GJ of thermal energy was for pellets made from fibrous hemp and maize biomass (MIX2-1) and pellets made from fibrous hemp and faba bean biomass (MIX2-3). Production of pellets from maize biomass (S-Mz) was found to have the highest carbon footprint (29.1 CO2eq GJ−1) and was associated with the lowest crop yield compared to the other six scenarios.Keywords
This publication has 68 references indexed in Scilit:
- Analytical Methods for the Rapid Determination of Solid Biofuel QualityChemie Ingenieur Technik, 2023
- Influence of wood species and additives on emission behavior of wood pellets in a residential pellet stove and a boilerBiomass Conversion and Biorefinery, 2023
- A systematic review of densified biomass products life cycle assessmentsInternational Journal of Environmental Science and Technology, 2023
- Densification of waste biomass for manufacturing solid biofuel pellets: a reviewEnvironmental Chemistry Letters, 2022
- Development of a total Ash Quality Index and an Ash Quality Label: Comparative analysis of slagging/fouling potential of solid biofuelsEnvironmental Science and Pollution Research, 2022
- Conversion of biomass to biofuels and life cycle assessment: a reviewEnvironmental Chemistry Letters, 2021
- Environmental Assessment of Solid Biofuels2018
- The ecoinvent database version 3 (part I): overview and methodologyThe International Journal of Life Cycle Assessment, 2016
- Life cycle assessment of densified wheat straw pellets in the Canadian PrairiesThe International Journal of Life Cycle Assessment, 2012
- Effects of the pelleting conditions on chemical composition and sugar yield of corn stover, big bluestem, wheat straw, and sorghum stalk pelletsBioprocess and Biosystems Engineering, 2011