Influence of AC system design on the realisation of tractive efforts by high adhesion locomotives
- 14 March 2017
- journal article
- research article
- Published by Taylor & Francis in Vehicle System Dynamics
- Vol. 55 (8) , 1241-1264
Abstract
The main task for heavy haul railway operators is to reduce the cost of exported minerals and enhance the long-term viability of rail transport operations through increasing productivity by running longer and heavier trains. The common opinion is that this is achievable by means of implementation of high adhesion locomotives with advanced AC traction technologies. Modern AC high adhesion locomotives are very complex mechatronic systems and can be designed with two alternative traction topologies of either bogie or individual axle controls. This paper describes a modelling approach for these two types of AC traction systems with the application of an advanced co-simulation methodology, where an electrical system and a traction algorithm are modelled in Matlab/Simulink, and a mechanical system is modelled in a multibody software package. Although the paper concentrates on the analysis of the functioning for these two types of traction control systems, the choice of reference slip values also has an influence on the performance of both systems. All these design variations and issues have been simulated for various adhesion conditions at the wheel–rail interface and their influence on the high traction performance of a locomotive equipped with two three-axle bogies has been discussed.Keywords
This publication has 47 references indexed in Scilit:
- Co-simulation of a mechatronic system using Gensys and SimulinkVehicle System Dynamics, 2012
- Theory of Stick-slip Vibration and Its Application in LocomotiveJournal of Mechanical Engineering, 2010
- Simulation of curving at low speed under high traction for passive steering hauling locomotivesVehicle System Dynamics, 2008
- Simulation of traction and curving for passive steering hauling locomotivesProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2008
- An inverse railway wagon model and its applicationsVehicle System Dynamics, 2007
- Idealized steering for hauling locomotivesProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2007
- Direct Torque Control of PWM Inverter-Fed AC Motors—A SurveyIEEE Transactions on Industrial Electronics, 2004
- Mechatronic developments for railway vehicles of the futureControl Engineering Practice, 2002
- Direct self-control (DSC) of inverter-fed induction machineIEEE Transactions on Power Electronics, 1988
- The adhesion of electric locomotivesProceedings of the IEE - Part A: Power Engineering, 1955