The Effect of Ultrafast Heating in Cold-Rolled Low Carbon Steel: Recrystallization and Texture Evolution
Open Access
Abstract
The microstructure and texture evolution of cold-rolled low carbon steel after ultrafast heating and quenching is investigated. Experiments were carried out at heating rates of 150 °C/s and 1500 °C/s. The recrystallization of ferrite is studied by scanning electron microscopy and electron backscattered diffraction techniques. The texture evolution of cold rolled steel during ultrafast heating was studied, making it possible to estimate the precise effect of heating rate on the orientations of newly formed grains. The experimental results showed that the recrystallization of ferrite was not completed before the full transformation of austenite. The noticeable increase in the fraction of recrystallized grains of diameter less than 1 µm, when the heating rate is increased from 150 °C/s to 1500 °C/s suggests that the increase of the heating rate enhances the nucleation of ferrite. The crystallographic orientations in recrystallized ferrite are strongly influenced by the heating rates. The effect of heating rate in the releasing of stored energy, carbon diffusion and spheroidization of cementite might explain some differences in textures observed in recrystallized ferrite.Keywords
This publication has 27 references indexed in Scilit:
- Microstructure, texture and mechanical properties in a low carbon steel after ultrafast heatingMaterials Science and Engineering: A, 2016
- The influence of ultra-fast annealing prior to quenching and partitioning on the microstructure and mechanical propertiesMaterials Science and Engineering: A, 2015
- High-efficiency fast-heating annealing of a cold-rolled dual-phase steelMaterials & Design (1980-2015), 2014
- Grain Refinement of a Cold Rolled TRIP Assisted Steel after Ultra Short AnnealingMaterials Science Forum, 2012
- Development of rapid heating and cooling (flash processing) process to produce advanced high strength steel microstructuresMaterials Science and Technology, 2011
- Grain Refinement and Texture Change in Interstitial Free Steels after Severe Rolling and Ultra-Short AnnealingMaterials Science Forum, 2004
- On the credibility of ultra rapid annealingMaterials Science and Engineering: A, 2003
- Influence of heating rate on anisothermal recrystallization in low and ultra-low carbon steelsMaterials Science and Engineering: A, 2001
- Recrystallization Kinetics of Low and Ultra Low Carbon Steels during High-rate Annealing.ISIJ International, 2001
- Bifurcation of thermal restoration processes in deformed iron and steelMaterials Science and Engineering: A, 1999