Frictional Properties of Simulated Fault Gouges from the Seismogenic Groningen Gas Field Under In Situ P–T ‐Chemical Conditions
- 27 November 2017
- journal article
- research article
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 122 (11) , 8969-8989
Abstract
We investigated the frictional properties of simulated fault gouges derived from the main lithologies present in the seismogenic Groningen gas field (NE Netherlands), employing in situ P–T conditions and varying pore fluid salinity. Direct shear experiments were performed on gouges prepared from the Carboniferous shale/siltstone substrate, the Upper Rotliegend Slochteren sandstone reservoir, the overlying Ten Boer claystone, and the Basal Zechstein anhydrite–carbonate caprock, at 100°C, 40 MPa effective normal stress, and sliding velocities of 0.1–10 μm/s. As pore fluids, we used pure water, 0.5–6.2 M NaCl solutions, and a 6.9 M mixed chloride brine mimicking the formation fluid. Our results show a marked mechanical stratigraphy, with a maximum friction coefficient (μ) of ~0.66 for the Basal Zechstein, a minimum of ~0.37 for the Ten Boer claystone, ~0.6 for the reservoir sandstone, and ~0.5 for the Carboniferous. Mixed gouges showed intermediate μ values. Pore fluid salinity had no effect on frictional strength. Most gouges showed velocity‐strengthening behavior, with little systematic effect of pore fluid salinity or sliding velocity on (a–b). However, Basal Zechstein gouge showed velocity weakening at low salinities and/or sliding velocities, as did 50:50 mixtures with sandstone gouge, tested with the 6.9 M reservoir brine. From a rate and state friction viewpoint, our results imply that faults incorporating Basal Zechstein anhydrite–carbonate material at the top of the reservoir are the most prone to accelerating slip, that is, have the highest seismogenic potential. The results are equally relevant to other Rotliegend fields in the Netherlands and N. Sea region and to similar sequences globally.Keywords
Funding Information
- Nederlandse Aardolie Maatschappij BV (NAM)
- European Research Council starting grant SEISMIC (335915)
- Netherlands Organization for Scientific Research (NWO) (854.12.011)
This publication has 88 references indexed in Scilit:
- Frictional properties of natural gouges from Longmenshan fault zone ruptured during the Wenchuan Mw7.9 earthquakeTectonophysics, 2013
- Fault structure, frictional properties and mixed-mode fault slip behaviorEarth and Planetary Science Letters, 2011
- Frictional Properties of Sedimentary Rocks and Natural Fault Gouge from the Longmen Shan Fault Zone, Sichuan, ChinaBulletin of the Seismological Society of America, 2010
- Insights on the geometry and mechanics of the Umbria–Marche earthquakes (Central Italy) from the integration of field and laboratory dataTectonophysics, 2009
- Frictional behaviour of simulated quartz fault gouges under hydrothermal conditions: Results from ultra-high strain rotary shear experimentsTectonophysics, 2008
- Internal structure and permeability of the Nojima fault, southwest JapanJournal of Structural Geology, 2008
- Velocity dependence of strength and healing behaviour in simulated phyllosilicate-bearing fault gougeTectonophysics, 2006
- Ultracataclasite structure and friction processes of the Punchbowl fault, San Andreas system, CaliforniaTectonophysics, 1998
- Influence of crystal plastic deformation on dilatancy and permeability development in synthetic salt rockTectonophysics, 1996
- Effects of chemically active solutions on shearing behavior of a sandstoneTectonophysics, 1990