Effect of additives for the reduction of NOx in the corrosion of overheating pipes
Authors:
- B. Gonzalez RolónBRB. Gonzalez Rolón
- C. Méndez HernándezCHC. Méndez Hernández
- 1 December 2020
- journal article
- research article
- Published by Elsevier in Engineering Failure Analysis
- Vol. 118
Abstract
No abstract availableKeywords
Funding Information
- CFE
- University of Guanajuato
This publication has 11 references indexed in Scilit:
- The Development of Postcombustion Control Technology2018
- Cold End Corrosion Avoiding by Using a New Type of Air Combustion Pre-HeaterMaterials Science Forum, 2017
- Microstructure Evolution and Creep Properties of 2.25Cr-1Mo Ferrite-Pearlite and Ferrite-bainite Steels After Exposure to Elevated TemperaturesMaterials Research, 2017
- Superheaters and reheaters2017
- Failure analysis of superheater tubeEngineering Failure Analysis, 2015
- Microstructural Degradation of Boiler Tubes Due to the Presence of Internal Oxide LayerJournal of Materials Research and Technology, 2012
- Failure of 2.25Cr–1Mo steel superheater tubes in a fluidized bed combustor due to fireside corrosionMaterials Characterization, 2011
- Failure Analysis and Prevention2002
- Theoretical study of the influence of mixing in the SNCR process. Comparison with pilot scale dataChemical Engineering Science, 2000
- Materials science and engineering – An introduction. Von W. D. Callister, Jr., 3. Auflage, XX, 811 S., zahlreiche Abb. und Tab., John Wiley & Sons. Inc. New York, 1994, paper back $37.95, handback $79.50, ISBN 0‐471‐30568‐5Materials and Corrosion, 1994