Adaptive Backlash Compensation for CNC Machining Applications
Open Access
Abstract
The mechanical transmission employed inside the computer numerical control (CNC) machine electromechanical system usually has an inherent backlash. As a position-controlled system is commonly used for the electromechanical system, the backlash limits the performance of the motion control system due to its nonlinearity and discontinuity. This paper proposes an effective method to adaptively detect and compensate for the backlash effect in real time, in which the end-effect load position of the CNC machine is estimated and controlled by the position-controlled servo system, in order to eliminate the influence of backlash on the contour path performance. The simulation results obtained from the model of a realistic CNC machine show the successful elimination of the error between the reference and the end-effector position and a significant improvement in the control system performance.Keywords
Funding Information
- Suzhou University (2020BS005)
This publication has 23 references indexed in Scilit:
- Suppression of mechanical resonance using torque disturbance observer for two-inertia system with backlash2015
- Methodology for the design of a thermal distortion compensation for large machine tools based in state-space representation with Kalman filterInternational Journal of Machine Tools and Manufacture, 2013
- Propagation of assembly errors in multitasking machines by the homogenous matrix methodThe International Journal of Advanced Manufacturing Technology, 2013
- Virtual CNC system. Part I. System architectureInternational Journal of Machine Tools and Manufacture, 2006
- Virtual CNC system. Part II. High speed contouring applicationInternational Journal of Machine Tools and Manufacture, 2006
- Evaluation of the stiffness chain on the deflection of end-mills under cutting forcesInternational Journal of Machine Tools and Manufacture, 2005
- High speed CNC system design. Part III: high speed tracking and contouring control of feed drivesInternational Journal of Machine Tools and Manufacture, 2001
- High speed CNC system design. Part I: jerk limited trajectory generation and quintic spline interpolationInternational Journal of Machine Tools and Manufacture, 2001
- Identification of and compensation for backlash on the contouring accuracy of CNC machining centresThe International Journal of Advanced Manufacturing Technology, 1997
- A study of backlash on the motion accuracy of CNC lathesInternational Journal of Machine Tools and Manufacture, 1996