3D Printing Technique-Improved Phase-Sensitive OTDR for Breakdown Discharge Detection of Gas-Insulated Switchgear
Open Access
Abstract
In this paper, we propose and demonstrate a gas-insulated switchgear (GIS) breakdown discharge detection system based on improved phase-sensitive optical time domain reflectometry (φ-OTDR) assisted by 3D-printed sensing elements. The sensing element is manufactured by a material with a high Poisson ratio for enhancement of the sensitivity of φ-OTDR to the acoustic emission detection during the breakdown discharge process. In our experiment, seven 3D-printed sensing elements incorporating with optical fibers are attached tightly onto the shell of the GIS, which are monitored by φ-OTDR to localize and detect the acoustic emission signal resulted from the breakdown discharge. Ultimately, thanks to the phase demodulation, acoustic signals induced by the breakdown discharge process can be captured and recovered. Furthermore, the time delay analysis of detected signals acquired by different sensing elements on the GIS breakdown discharge unit is able to distinguish the location of the insulation failure part in the GIS unit. It suggests that the φ-OTDR incorporated with 3D printing technology shows the advantage of robustness in GIS breakdown discharge monitoring and detection.Keywords
Funding Information
- National Natural Science Foundation of China (61975108, 61905138, 61635006 and 61875118)
- Shanghai Young Oriental Scholar (QD2018009)
This publication has 21 references indexed in Scilit:
- A High Sensitivity Optical Fiber Sensor for GIS Partial Discharge DetectionIEEE Sensors Journal, 2019
- Novel Fiber-Optic Ring Acoustic Emission SensorSensors, 2018
- A Novel GIS Partial Discharge Detection Sensor With Integrated Optical and UHF MethodsIEEE Transactions on Power Delivery, 2016
- A Fiber-Optic Sensor for Acoustic Emission Detection in a High Voltage Cable SystemSensors, 2016
- Preparation and Application of TiO2 Nanotube Array Gas Sensor for SF6-Insulated Equipment Detection: a ReviewDiscover Nano, 2016
- Acoustic emission from DC pre-treeing discharge processes in silicone elastomerIEEE Transactions on Dielectrics and Electrical Insulation, 2015
- Correlation analysis between formation process of SF6 decomposed components and partial discharge qualitiesIEEE Transactions on Dielectrics and Electrical Insulation, 2013
- Status review on partial discharge measurement techniques in gas-insulated switchgear/linesElectric Power Systems Research, 2004
- The excitation of UHF signals by partial discharges in GISIEEE Transactions on Dielectrics and Electrical Insulation, 1996
- Partial discharge. XIII. Acoustic partial discharge detection-fundamental considerationsIEEE Electrical Insulation Magazine, 1992