Parametric Prediction on Boron-Doping for Silicon Strain Gauges Applications
- 8 December 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (2) , 1777-1784
Abstract
Diffusion is a critical doping process in silicon-based strain gauge fabrication, significantly influencing device performance. Traditional tube diffusion relies on empirical methods and repeated trials, limiting cost reduction and making it difficult to determine process parameters from strain gauge design requirements. Moreover, the cross effects between diffusion parameters are not fully understood. This paper develops a predictive model for tube diffusion using a solid-state boron nitride (BN) source, based on the response surface method (RSM). The model allows rapid determination of diffusion temperature, time, and protective argon flow rate to achieve target sheet resistance. Response surface analysis reveals that increasing temperature and time lowers sheet resistance and enhances uniformity, while time and flow rate show negligible cross effects. Multi-physical field simulations analyze the cross effects between temperature and flow rate, indicating that flow rates above 550 sccm increase temperature differences across wafers, reducing diffusion flux and uniformity. Experimental validation demonstrates a mean error of only 2.9% between predicted and actual sheet resistance, confirming the model’s accuracy. Using the optimized diffusion parameters, a semiconductor strain gauge with a gauge factor (GF) of 69.62 and a temperature coefficient of gauge factor (TCGF) of 0.53% F.S./°C was successfully fabricated. This predictive approach provides an efficient strategy for optimizing diffusion processes in strain gauge manufacturing, offering both performance control and cost reduction.Keywords
Funding Information
- Chinese Aeronautical Establishment (20240012063002)
- Chinese Aeronautical Establishment (20230012063001)
- Science and Technology Program of Liaoning Province (2023JH1/10400044)
This publication has 33 references indexed in Scilit:
- High-quality p-type emitter using boron aluminum source for n-type TOPCon solar cellsMaterials Science in Semiconductor Processing, 2024
- Enhancing cardiomyocytes contraction force measuring in drug testing: Integration of a highly sensitive single-crystal silicon strain sensor into SU-8 cantileversBiosensors and Bioelectronics, 2023
- Boron tube diffusion process parameters for high-efficiency n-TOPCon solar cells with selective boron emittersSolar Energy Materials and Solar Cells, 2023
- Structural health monitoring of civil engineering structures by using the internet of things: A reviewJournal of Building Engineering, 2022
- Application of response surface methodology with a Box–Behnken design for struvite precipitationAdvanced Powder Technology, 2019
- Optimization of Phosphorus Emitter Formation from POCl3 Diffusion for p-Type Silicon Solar Cells ProcessingSilicon, 2016
- Facile Synthesis of Large‐Area Ultrathin Hexagonal BN Films via Self‐Limiting Growth at the Molten B2O3 SurfaceSmall, 2013
- Boron implantations in silicon: A comparison of charge carrier and boron concentration profilesApplied Physics A, 1974
- ChemInform Abstract: OXIDIZED BORON NITRIDE WAFERS AS AN IN-SITU BORON DOPANT FOR SILICON DIFFUSIONSChemischer Informationsdienst, 1973
- Properties of Ionic Bombarded SiliconBell System Technical Journal, 1952