Mechanical Characterization of Timber-to-Timber Composite (TTC) Joints with Self-Tapping Screws in a Standard Push-Out Setup
Open Access
- 18 September 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (18) , 6534
Abstract
Self-tapping screws (STSs) can be efficiently used in various fastening solutions for timber constructions and are notoriously able to offer high stiffness and load-carrying capacity, compared to other timber-to-timber composite (TTC) joint typologies. The geometrical and mechanical characterization of TTC joints, however, is often hard and uncertain, due to a combination of various influencing parameters and mechanical aspects. Among others, the effects of friction phenomena between the system components and their reciprocal interaction under the imposed design loads can remarkably influence the final estimates on structural capacity, in the same way of possible variations in the boundary conditions. The use of Finite Element (FE) numerical models is well-known to represent a robust tool and a valid alternative to costly and time consuming experiments and allows one to further explore the selected load-bearing components at a more refined level. Based on previous research efforts, this paper presents an extended FE investigation based on full three-dimensional (3D) brick models and surface-based cohesive zone modelling (CZM) techniques. The attention is focused on the mechanical characterization of small-scale TTC specimens with inclined STSs having variable configurations, under a standard push-out (PO) setup. Based on experimental data and analytical models of literature, an extended parametric investigation is presented and correlation formulae are proposed for the analysis of maximum resistance and stiffness variations. The attention is then focused on the load-bearing role of the steel screws, as an active component of TTC joints, based on the analysis of sustained resultant force contributions. The sensitivity of PO numerical estimates to few key input parameters of technical interest, including boundaries, friction and basic damage parameters, is thus discussed in the paper.Keywords
This publication has 12 references indexed in Scilit:
- Cross-laminated timber connections assembled with a combination of screws in withdrawal and screws in shearEngineering Structures, 2018
- Testing of timber-to-timber screw-connections in hybrid configurationsConstruction and Building Materials, 2018
- Mechanical behavior of timber–concrete connections with inclined screwsInternational Journal of Computational Methods and Experimental Measurements, 2017
- Stiffness model for inclined screws in shear-tension mode in timber-to-timber jointsEngineering Structures, 2017
- The influences of moisture content variation, number and width of gaps on the withdrawal resistance of self tapping screws inserted in cross laminated timberConstruction and Building Materials, 2016
- Finite element modelling of inclined screwed timber to timber connections with a large gap between the elementsEuropean Journal of Wood and Wood Products, 2016
- Evaluation of bending tests on composite glulam–CLT beams connected with double-sided punched metal plates and inclined screwsConstruction and Building Materials, 2015
- Theoretical and experimental analysis of timber-to-timber joints connected with inclined screwsConstruction and Building Materials, 2010
- Slip modulus of inclined screws in timber–concrete floorsProceedings of the Institution of Civil Engineers - Structures and Buildings, 2010
- Mechanical properties of self-tapping screws and nails in woodCanadian Journal of Civil Engineering, 2002