Zero Torque Control for EV Coasting Considering Cross-Coupling Inductance
Authors:
- 14 March 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 64 (8) , 6096-6104
Abstract
Coasting is a deceleration driving mode not recurring to an active braking while sustaining rolling as much as possible. In an electric vehicle (EV), coasting should be realized in theory by letting the q-axis current set to zero. However, unintentional braking takes place at high speeds when the gas pedal is tapped off. The reason is that negative torque is developed even when the q-axis current is equal to zero. Such a braking reduces the coasting distance. To prevent undesirable braking, positive q-axis current is often utilized in practice. In this paper, we focus on a braking torque component caused by a cross-coupling inductance Lqd. It is produced only by the d-axis current, and is normally small. However, its magnitude becomes noticeable in a deep field-weakening region. As a curing method, it is suggested to shift the angle of the reference frame clockwise. The magnitude of compensation angle is derived analytically using two different methods. The proposed compensation method was demonstrated by simulation and experiments.Keywords
This publication has 25 references indexed in Scilit:
- Research on the Performances and Parameters of Interior PMSM Used for Electric VehiclesIEEE Transactions on Industrial Electronics, 2016
- An Altered PWM Scheme for Single-Mode Seamless Control of AC Traction Motors for Electric Drive VehiclesIEEE Transactions on Industrial Electronics, 2015
- Next generation chevy volt electric machines; design, optimization and control for performance and rare-earth mitigation2015
- Comparative Study of Interior Permanent Magnet, Induction, and Switched Reluctance Motor Drives for EV and HEV ApplicationsIEEE Transactions on Transportation Electrification, 2015
- Advanced High-Power-Density Interior Permanent Magnet Motor for Traction ApplicationsIEEE Transactions on Industry Applications, 2014
- Extended MTPA with cross coupling inductances for electrically excited synchronous motors2013
- A Novel Seamless Direct Torque Control for Electric Drive VehiclesJournal of Power Electronics, 2011
- A new direct torque control for AC motors with over modulation ability2011
- Identification of Machine Parameters of a Synchronous MotorIEEE Transactions on Industry Applications, 2005
- Design and field-weakening performanceofpermanent-magnet/reluctance motorwith two-part rotorIEE Proceedings - Electric Power Applications, 1998