Profile coating and its application for Kirkpatrick-Baez mirrors
- 1 December 2003
- journal article
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 42 (12) , 3622-3628
Abstract
For microfocusing x-ray mirrors, an elliptical shape is essential for aberration-free optics. However, it is difficult to polish elliptical mirrors to x-ray quality smoothness. A differential coating method to convert a cylindrical mirror to an elliptical one has been previously reported. The coating was obtained by varying the sputter source power over a moving substrate. Here we report a new method of profile coating: the sputter source power is kept constant, while the substrate is passed over a contoured mask at a constant speed to obtain a desired profile along the direction perpendicular to the direction of substrate motion. The shape of the contour depends on the desired profile and the thickness distribution directly above the gun at the substrate level. The thickness distribution was measured on films coated on Si wafers using a spectroscopic ellipsometer with computer-controlled translation stages. A model was developed to fit the measured thickness distribution, which determines the relative thickness weightings. When the substrate moves during a deposition, the film thickness is proportional to the length of the opening on the shield can along the direction of motion. By equating the sum of relative weightings to the required relative thickness at the same position, the length of the opening at that position can be determined. By repeating the same process for the whole length of the required profile, a contour can be obtained for a desired thickness profile. The number of passes and the speed of the substrate are determined according to the required thickness and the growth-rate calibration of a test run. The mirror coating profile is determined from the difference between the ideal surface figure of a focus ellipse and the surface figure obtained from a long-trace profiler measurement on the substrate. A Kirkpatrick-Baez (KB) mirror pair was made using Au as a coating material and cylindrically polished mirrors as substrates. Synchrotron x-ray results using this KB mirror pair showed a focused spot size of 0.4×0.4 μm2. © 2003 Society of Photo-Optical Instrumentation Engineers.
Keywords
This publication has 13 references indexed in Scilit:
- Submicron focusing of hard x-ray beam by elliptically figured mirrors for scanning x-ray microscopy2002
- The present state of Kirkpatrick-Baez mirror systems at the ESRF2002
- Submicron focusing of hard x rays with reflecting surfaces at the ESRF2001
- Laterally graded multilayers and their applicationsJournal of Vacuum Science & Technology A, 2001
- Elliptical x-ray microprobe mirrors by differential depositionReview of Scientific Instruments, 2000
- Dynamically figured Kirkpatrick Baez x-ray microfocusing optics1998
- New schemes for producing high-accuracy elliptical x-ray mirrors by elastic bending1996
- Soft X-Ray Optics1994
- Film thickness distribution in magnetron sputteringVacuum, 1988
- Formation of Optical Images by X-RaysJournal of the Optical Society of America, 1948