Plasma processing of PDMS based spinal implants for covalent protein immobilization, cell attachment and spreading
- 30 November 2018
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science: Materials in Medicine
- Vol. 29 (12) , 178
Abstract
PDMS is widely used for prosthetic device manufacture. Conventional ion implantation is not a suitable treatment to enhance the biocompatibility of poly dimethyl siloxane (PDMS) due to its propensity to generate a brittle silicon oxide surface layer which cracks and delaminates. To overcome this limitation, we have developed new plasma based processes to balance the etching of carbon with implantation of carbon from the plasma source. When this carbon was implanted from the plasma phase it resulted in a surface that was structurally similar and intermixed with the underlying PDMS material and not susceptible to delamination. The enrichment in surface carbon allowed the formation of carbon based radicals that are not present in conventional plasma ion immersion implantation (PIII) treated PDMS. This imparts the PDMS surfaces with covalent protein binding capacity that is not observed on PIII treated PDMS. The change in surface energy preserved the function of bound biomolecules and enhanced the attachment of MG63 osteosarcoma cells compared to the native surface. The attached cells, an osteoblast interaction model, showed increased spreading on the treated over untreated surfaces. The carbon-dependency for these beneficial covalent protein and cell linkage properties was tested by incorporating carbon from a different source. To this end, a second surface was produced where carbon etching was balanced against implantation from a thin carbon-based polymer coating. This had similar protein and cell-binding properties to the surfaces generated with carbon inclusion in the plasma phase, thus highlighting the importance of balancing carbon etching and deposition. Additionally, the two effects of protein linkage and bioactivity could be combined where the cell response was further enhanced by covalently tethering a biomolecule coating, as exemplified here with the cell adhesive protein tropoelastin. Providing a balanced carbon source in the plasma phase is applicable to prosthetic device fabrication as illustrated using a 3-dimensional PDMS balloon prosthesis for spinal implant applications. Consequently, this study lays the groundwork for effective treatments of PDMS to selectively recruit cells to implantable PDMS fabricated biodevices.Keywords
Funding Information
- Australian Research Council
- FP7 People: Marie-Curie Actions (PIIF-GA-2013-624904)
- Ministry of Education of Perm Territory
- Australian Research Council
- Australian Research Council
This publication has 29 references indexed in Scilit:
- The Vroman effect: Competitive protein exchange with dynamic multilayer protein aggregatesColloids and Surfaces B: Biointerfaces, 2013
- Adsorption and inactivation behavior of horseradish peroxidase on various substratesColloids and Surfaces B: Biointerfaces, 2010
- Restoration of compressive loading properties of lumbar discs with a nucleus implant—a finite element analysis studyThe Spine Journal, 2010
- Surface molecular property modifications for poly(dimethylsiloxane) (PDMS) based microfluidic devicesMicrofluidics and Nanofluidics, 2009
- Biocompatible polymer materials: Role of protein–surface interactionsProgress in Polymer Science, 2008
- Enhancement of the response of poly(dimethylsiloxane) hollow prisms through air mirrors for absorbance-based sensingTalanta, 2008
- A lithographically-patterned, elastic multi-electrode array for surface stimulation of the spinal cordBiomedical Microdevices, 2007
- Collagenous tissue formation in association with medical implantsCurrent Opinion in Solid State and Materials Science, 2001
- Hydrophobicity changes in silicone rubbersIEEE Transactions on Dielectrics and Electrical Insulation, 1999
- Fibroblast stimulation by monocytes cultured on protein adsorbed biomedical polymers. I. Biomer and polydimethylsiloxaneJournal of Biomedical Materials Research, 1991