Low Temperature Preparation of Mullite Whisker via Non-Hydrolytic Sol-Gel Process Combined with Molten Salt Method
Authors:
- 30 June 2014
- journal article
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 936, 975-980
Abstract
Mullite whisker was prepared at low temperature via non-hydrolytic sol-gel (NHSG) process combined with molten salt method. The influence of heat treatment temperature was studied on the morphology and the microstructure of whisker, and its growth mechanism was also described. The results show that the mullite whisker appears at the lowest temperature of 750 °C, and optimized mullite whisker can be prepared at 850 °C with the growth direction of [00, whose diameter is in the range of 170~300 nm with the aspect ratio of >30.Keywords
This publication has 19 references indexed in Scilit:
- Low Temperature Synthesis of Mullite Whisker by Nonhydrolytic Sol-Gel Process Combined with Molten Salt MethodAdvanced Materials Research, 2012
- Preparation of porous lamellar mullite ceramics with whisker skeletons by electrospinning and pressure moldingMaterials Letters, 2012
- Mullite whiskers derived from kaolinCeramics International, 2009
- Preparation of mullite whiskers from topaz decompositionMaterials Letters, 2004
- Growth of mullite whiskers in mechanochemically activated oxides doped with WO3Journal of the European Ceramic Society, 2003
- The role of fine alumina and mullite particles on the thermomechanical behaviour of alumina–mullite refractory materialsMaterials Letters, 2002
- Porous mullite ceramics from natural topazMaterials Letters, 1999
- Synthesis and sintered properties of mullite powder from seeded diphasic Al2O3-SiO2 gelMaterials Letters, 1995
- The Silica-Alumina System: Stable and Metastable Equilibria at 1.0 AtmosphereScience, 1974
- Tetragonal Mullite-like Phase from Co-precipitated GelsNature, 1961