Simplified model for predicting acoustic performance of an underwater sound absorption coating
Author:
- 25 October 2012
- journal article
- research article
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 20 (3) , 339-354
Abstract
A simplified analytical model for predicting the acoustic performance of an underwater sound absorption coating is presented in this paper. The sound absorption coating contains hexagonally arrayed cylindrical cavities, so the unit cell of sound absorption coating could be approximated as a cylindrical tube. When the plane wave normally impinges on the sound absorption coating, the axisymmetric wave which propagates in the viscoelastic cylindrical tube will be excited. According to the two-dimensional analytic model, only the first mode (the lowest) should be taken into account in the acoustic performance estimation at low frequencies, because the attenuation of the first propagating mode is much lower than the others. Based on this conclusion, the simplified analytical approach has been given as follows: to solve the characteristic equation, the wavenumber of axisymmetric wave will be obtained firstly; then, the effective impedance of viscoelastic cylindrical tube can be calculated after the axial stress and the axial displacement are averaged, and the reflection coefficient and the transmission coefficient of sound absorption coating can be easily calculated by using the transfer matrix. Comparisons of the simplified analytical model to the finite element method and to the experiment data validate that the present model is a workable and satisfactory approach to predict the acoustic performance of sound absorption coating. In the final section, the effects of several parameters such as the cavity geometry and the acoustical termination on the performance of sound absorption coating have been discussed using the present model.Keywords
This publication has 13 references indexed in Scilit:
- Numerical design of Alberich anechoic coatings with superellipsoidal cavities of mixed sizesThe Journal of the Acoustical Society of America, 2008
- Sound absorption by viscoelastic coatings with periodically distributed cavitiesThe Journal of the Acoustical Society of America, 2006
- Analysis of reflection characteristics of a normal incidence plane wave on resonant sound absorbers: A finite element approachThe Journal of the Acoustical Society of America, 1993
- Analysis of the scattering of a plane acoustic wave by a doubly periodic structure using the finite element method: Application to Alberich anechoic coatingsThe Journal of the Acoustical Society of America, 1991
- Analysis of the scattering of a plane acoustic wave by a periodic elastic structure using the finite element method: Application to compliant tube gratingsThe Journal of the Acoustical Society of America, 1990
- Comments on ‘Absorption mechanisms for waterborne sound in Alberich anechoic layers’Ultrasonics, 1985
- Resonance reflection of acoustic waves by a perforated bilaminar rubber coating modelThe Journal of the Acoustical Society of America, 1983
- Absorption mechanisms for waterborne sound in Alberich anechoic layersUltrasonics, 1981
- One-dimensional model for acoustic absorption in a viscoelastic medium containing short cylindrical cavitiesThe Journal of the Acoustical Society of America, 1977
- Pulsation Oscillations of Cavities in RubberThe Journal of the Acoustical Society of America, 1958