Aqueous‐Processed Polymer/Nanocrystal Hybrid Solar Cells with Double‐Side Bulk Heterojunction
Authors:
- 4 December 2017
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 8 (8)
Abstract
Aqueous‐solution‐processed solar cells (ASCs) are promising candidates of the next‐generation large‐area, low‐cost, and flexible photovoltaic conversion equipment because of their unique environmental friendly property. Aqueous‐solution‐processed polymer/nanocrystals (NCs) hybrid solar cells (AHSCs) can effectively integrate the advantages of the polymer (e.g., flexibility and lightweight) and the inorganic NCs (e.g., high mobility and broad absorption), and therefore be considered as an ideal system to further improve the performance of ASCs. In this work, double‐side bulk heterojunction (BHJ), in which one BHJ combines the active material with electron transport material and the other combines the active material with hole transport material, is developed in the AHSCs. Through comparing with the single‐side BHJ device, promoted carrier extraction, enhanced internal quantum efficiency, extended width of the depletion region, and prolonged carrier lifetime are achieved in double‐side BHJ devices. As a result, power conversion efficiency exceeding 6% is obtained, which breaks the bottleneck efficiency around ≈5.5%. This work demonstrates a device architecture which is more remarkable compared with the traditional only donor–acceptor blended BHJ. Under conservative estimation, it provides instructive architecture not only in the ASCs, but also in the organic solar cells (SCs), quantum dot SCs, and perovskite SCs.Keywords
Funding Information
- National Natural Science Foundation of China (51433003, 21574018)
This publication has 50 references indexed in Scilit:
- Controlling Interfacial Recombination in Aqueous Dye‐Sensitized Solar Cells by Octadecyltrichlorosilane Surface TreatmentAngewandte Chemie International Edition, 2014
- The role of miscibility in polymer:fullerene nanoparticulate organic photovoltaic devicesNano Energy, 2013
- Toward green solvent processable photovoltaic materials for polymer solar cells: the role of highly polar pendant groups in charge carrier transport and photovoltaic behaviorEnergy & Environmental Science, 2013
- All-water-solution processed solar cells based on PPV and TiO2 nanocrystalsSolar Energy Materials and Solar Cells, 2012
- Opto-electrical and morphological characterization of water soluble conjugated polymers for eco-friendly hybrid solar cellsSolar Energy Materials and Solar Cells, 2011
- Aqueous colloidal CuInS2 for quantum dot sensitized solar cellsJournal of Materials Chemistry, 2011
- Fabrication of Polymer Solar Cells Using Aqueous Processing for All Layers Including the Metal Back ElectrodeAdvanced Energy Materials, 2010
- Directly assembled CdSe quantum dots on TiO2 in aqueous solution by adjusting pH value for quantum dot sensitized solar cellsElectrochemistry Communications, 2009
- Characteristics of water-soluble polythiophene: TiO2 composite and its application in photovoltaicsJournal of Applied Physics, 2005
- Water-soluble polythiophene∕nanocrystalline TiO2 solar cellsApplied Physics Letters, 2005