Multi-Objective Optimization of Shell-and-Tube Heat Exchanger Performance Using CFD-Driven Surrogate and Learning-Based Methods
Authors:
- Abhishek Kumar MishraAMAbhishek Kumar Mishra
- Arnav BhardwajABArnav Bhardwaj
- Raj Kumar SinghRSRaj Kumar Singh
Preprint
- 23 September 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Shell-and-tube heat exchanger performance is governed by competing thermal and hydraulic objectives that single-variable optimisation cannot resolvesimultaneously. This study introduces a unified surrogate-assisted frameworkin which baffle inclination angle θ ∈ [-25◦,25◦] and perforation diameterd ∈[2,5] mmare treated as continuous co-design variables. A twelve-memberANN ensemble trained on 35 CFD-generated samples serves as the frozenevaluation oracle for four independent optimisation paradigms: NSGA-II,Bayesian optimisation, particle swarm optimisation, and deep reinforcementlearning. Saturation diagnostics confirmed surrogate fidelity prior to everyrun. Perforation diameter emerged as the dominant hydraulic lever, withlarge perforations triggering a shift from recirculation-dominated cross-flowto jet-assisted wake suppression that reduces friction substantially withoutproportional thermal penalty. DRL-PPO located the globally superior configuration (θ = 20.88◦, d = 4.46 mm), achieving a CFD-verified thermohydraulic ratio of j/f = 0.01264: an 18.6% gain over the conventionalperpendicular unperforated baseline, a 20.0% improvement over the PECoptimal solid inclined reference, and a 35.1% friction factor reduction relative to the same inclined solid reference. All surrogate prediction errorsremained below 2.8% at verified optima, establishing physical credibility ofthe reported improvements.Keywords
This publication has 43 references indexed in Scilit:
- The Effect of the Baffle Number and Baffle Spacing on Vibrations and Heat Transfer in a Shell-and-Tube Heat Exchanger: An Experimental Investigation and Numerical ModelingJournal of Vibration Engineering & Technologies, 2025
- Optimization of Shell and Tube Heat Exchangers Sizing with Heat Transfer Enhancement2020
- Impact of inclined and perforated baffles on the laminar thermo-flow behavior in rectangular channelsSN Applied Sciences, 2020
- Numerical study of shell and tube heat exchanger with different cross-section tubes and combined tubesInternational Journal of Energy and Environmental Engineering, 2019
- Enhancement of convective heat transfer in smooth air channels with wall-mounted obstacles in the flow pathJournal of Thermal Analysis and Calorimetry, 2018
- Optimization design of shell-and-tube heat exchanger by entropy generation minimization and genetic algorithmApplied Thermal Engineering, 2009
- Use of genetic algorithms for the optimal design of shell-and-tube heat exchangersApplied Thermal Engineering, 2009
- Optimization of compact heat exchangers by a genetic algorithmApplied Thermal Engineering, 2008
- Heat exchanger network synthesis and optimisation using genetic algorithmApplied Thermal Engineering, 2005
- Performance evaluation criteria for enhanced heat transfer surfacesInternational Journal of Heat and Mass Transfer, 1994