Optimization of Hybrid Ink Formulation and IPL Sintering Process for Ink-Jet 3D Printing
Open Access
- 14 May 2021
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 11 (5) , 1295
Abstract
Ink-jet 3D printing technology facilitates the use of various materials of ink on each ink-jet head and simultaneous printing of multiple materials. It is suitable for manufacturing to process a complex multifunctional structure such as sensors and printed circuit boards. In this study, a complex structure of a SiO2 insulation layer and a conductive Cu layer was fabricated with photo-curable nano SiO2 ink and Intense Pulsed Light (IPL)-sinterable Cu nano ink using multi-material ink-jet 3D printing technology. A precise photo-cured SiO2 insulation layer was designed by optimizing the operating conditions and the ink rheological properties, and the resistance of the insulation layer was 2.43 × 1013 Ω·cm. On the photo-cured SiO2 insulation layer, a Cu conductive layer was printed by controlling droplet distance. The sintering of the IPL-sinterable nano Cu ink was performed using an IPL sintering process, and electrical and mechanical properties were confirmed according to the annealing temperature and applied voltage. Then, Cu conductive layer was annealed at 100 °C to remove the solvent, and IPL sintered at 700 V. The Cu conductive layer of the complex structure had an electrical property of 29 µΩ·cm and an adhesive property with SiO2 insulation layer of 5B.Keywords
This publication has 44 references indexed in Scilit:
- An Overview on 3D Printing Technology: Technological, Materials, and ApplicationsProcedia Manufacturing, 2019
- Additive manufacturing (3D printing): A review of materials, methods, applications and challengesComposites Part B: Engineering, 2018
- 3D printing of polymer matrix composites: A review and prospectiveComposites Part B: Engineering, 2017
- Multiprocess 3D printing for increasing component functionalityScience, 2016
- Direct Intense Pulsed Light Sintering of Inkjet-Printed Copper Oxide Layers within Six MillisecondsACS Applied Materials & Interfaces, 2014
- Relationship between the dye/additive interaction and inkjet ink droplet formationDyes and Pigments, 2012
- Multi-materials drop-on-demand inkjet technology based on pneumatic diaphragm actuatorScience China Technological Sciences, 2010
- Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printingBiomaterials, 2008
- Piezoelectric shear mode drop-on-demand inkjet actuatorSensors and Actuators A: Physical, 2002
- A new method for significantly reducing drop radius without reducing nozzle radius in drop-on-demand drop productionPhysics of Fluids, 2002