Zero-Brittleness Size-Effect Method for One-Size Fracture Test of Concrete
Authors:
- 1 May 1996
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 122 (5) , 458-468
Abstract
This paper proposes a new and less laborious version of the size-effect method for measuring the fracture energy or fracture toughness of concrete as well as other nonlinear fracture characteristics, such as the effective length of fracture process zone or critical crack-tip opening displacement. The size-effect method, based on the size-effect law, is the simplest to carry out because only the maximum loads of specimens need to be measured. No measurements of postpeak deflection and unloading stiffness, nor observations of crack-tip location, are needed; the testing machine need not be very stiff, and there is no need for closed-loop displacement control. The simplicity of the method makes it suitable not only for the laboratory but also for field quality control. In the original version of the size-effect method, notched specimens of different sizes are tested. The proposed new version further simplifies testing by allowing the use of notched specimens of only one size. The idea is to supplement the one...Keywords
This publication has 10 references indexed in Scilit:
- Variable-notch one-size test method for fracture energy and process zone lengthEngineering Fracture Mechanics, 1996
- Modulus of Rupture: Size Effect due to Fracture Initiation in Boundary LayerJournal of Structural Engineering, 1995
- Discussion of “ Fracture Mechanics and Size Effect of Concrete in Tension ” by Tianxi Tang, Surendra P. Shah, and Chengsheng Ouyang (November, 1992, Vol. 118, No. 11)Journal of Structural Engineering, 1994
- Rate Effects and Load Relaxation in Static Fracture of ConcreteACI Materials Journal, 1992
- Identification of nonlinear fracture properties from size effect tests and structural analysis based on geometry-dependent R-curvesInternational Journal of Rock Mechanics and Mining Sciences, 1991
- Fracture Properties and Brittleness of High-Strength ConcreteACI Materials Journal, 1990
- Determination of fracture energy, process zone longth and brittleness number from size effect, with application to rock and conereteInternational Journal of Fracture, 1990
- Two Parameter Fracture Model for ConcreteJournal of Engineering Mechanics, 1985
- Results of three comparative test series for determining the fracture energyG F of concreteMaterials and Structures, 1985
- Size Effect in Blunt Fracture: Concrete, Rock, MetalJournal of Engineering Mechanics, 1984