Functionalization of poly(butylene adipate‐co‐terephthalate) with itaconic anhydride through graft copolymerization
Open Access
- 22 April 2022
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (26)
Abstract
Poly(butylene adipate‐co‐terephthalate) (PBAT) was functionalised with itaconic anhydride (IA) via melt grafting in a batch mixer, initiated by dicumyl peroxide (DCP). It was found that the ratio of IA to DCP is critical to avoid undesired side reactions, such as crosslinking and chain scission. PBAT and other polyesters with low aliphatic hydrocarbon content are relatively unreactive toward radical graft modification, providing relatively low degree of grafting. Using 2 wt% IA and 1.2 wt% DCP gave the highest degree of grafting (1%), with little indication of crosslinking or chain scission. The complex reaction mechanism of grafting presents a clear competition between grafting, homopolymerization, crosslinking, and chain scission. Using non‐isothermal kinetic modeling, it was shown that the reaction is not first order, and that models making this assumption leads to incorrect results. Using the Vyazovkin model‐free method, the effective rate constant was predicted over a typical melt processing temperature range. Low reagent concentration resulted in the lowest effective rate constant, and it was shown that the activation energy changes with conversion and is also affected by reagent concentration.Keywords
This publication has 33 references indexed in Scilit:
- Preparation and Characterization of PE‐g‐AItMacromolecular Symposia, 2013
- Determination of pre-exponential factors and of the mathematical functions f(α) or G(α) that describe the reaction mechanism in a model-free wayThermochimica Acta, 2013
- Utilization of peanut husks as a filler in aliphatic–aromatic polyesters: Preparation, characterization, and biodegradabilityPolymer Degradation and Stability, 2012
- Homer Kissinger and the Kissinger equationThermochimica Acta, 2012
- Graft copolymerization of itaconic acid onto sodium alginate using benzoyl peroxideCarbohydrate Polymers, 2010
- Control of macromolecular architecture during the reactive functionalization in the melt of olefin polymersProgress in Polymer Science, 2009
- Recent Advances in Reactive Extrusion Processing of Biodegradable Polymer‐Based CompositionsMacromolecular Materials and Engineering, 2008
- Production of Starch Foams by Twin-Screw Extrusion: Effect of Maleated Poly(butylene adipate-co-terephthalate) as a CompatibilizerBiomacromolecules, 2005
- Styrene grafting onto a polyolefin in an internal mixer and a twin‐screw extruder: Experiment and kinetic modelPolymer Engineering & Science, 2001
- Free‐radical grafting of monomers to polydienes. II. Kinetics and mechanism of styrene grafting to polybutadieneJournal of Polymer Science: Polymer Chemistry Edition, 1974