Characteristics of Strata Behavior during Thick Seam Mining by Fully-Mechanized Top Coal Caving in a Loess-Covered Gullied Region
Open Access
Abstract
This study systematically investigates the overburden movement and strata behavior at a fully-mechanized top coal caving (FMTCC) face in a thick coal seam in a loess-covered gullied region by field measurement and theoretical analysis. A comparative analysis was performed to examine how the attitude of surface gullies and the structure of overburden affect face support resistance. The characteristics and evolution mechanism of strata behavior during FMTCC under gully slopes in a loess-covered gullied region were discovered through a mechanical analysis of the roof structure and a comparison to the mining of a typical shallow seam under gully slopes. The study found that as the FMTCC face advanced, the strata behavior initiated in the middle part of the face and then continued to both ends, and its intensity was higher in the middle part than in the upper and lower parts. During mining under gullies, the increases in support resistance were generally less than 5% (except for the maximum increases of 7–9%), indicating that the occurrence of gullies on the surface had little influence on the strata behavior at the FMTCC face. Due to the increased burial depth and the number of key strata, the roof at the FMTCC face under gullies formed a stable load-bearing structure called a voussoir beam, which was the key difference from the strata behavior characteristics in the shallow mine under gullies.Keywords
Funding Information
- National Natural Science Foundation of China (Grant No.51474206, No.51404254, No.51264035)
- National Key Research and Development Program of China (973 Program-No.2015CB162500)
- the Fundamental Research Funds for the Central Universities (2014QNA49)
- Jiangsu Basic Research Program (Natural Science Foundation- No.BK20150051)
- the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
- C Class Sponsoned Project of Jiangsu Province Six Talent Peaks (GDZB-052)
- Qinglan Project of Jiangsu Province of China
This publication has 20 references indexed in Scilit:
- A new research system for caving mechanism analysis and its application to sublevel top-coal caving miningInternational Journal of Rock Mechanics and Mining Sciences, 2016
- Flow of top coal and roof rock and loss of top coal in fully mechanized top coal caving mining of extra thick coal seamsArabian Journal of Geosciences, 2016
- Monitoring and modelling of gas dynamics in multi-level longwall top coal caving of ultra-thick coal seams, part I: Borehole measurements and a conceptual model for gas emission zonesInternational Journal of Coal Geology, 2015
- Caving mechanisms of loose top-coal in longwall top-coal caving mining methodInternational Journal of Rock Mechanics and Mining Sciences, 2014
- Study on Fully-Mechanized Top Coal Caving Mining under Water Body with Shallow Overburden and Thin BedrockAdvanced Materials Research, 2013
- A new cavability assessment criterion for Longwall Top Coal CavingInternational Journal of Rock Mechanics and Mining Sciences, 2010
- Similar material simulation research on movement law of roof over-lying strata in stope of fully mechanized caving face with large mining heightJournal of Coal Science and Engineering (China), 2010
- Numerical simulation of the top coal caving process using the discrete element methodInternational Journal of Rock Mechanics and Mining Sciences, 2009
- Investigations into stress shell characteristics of surrounding rock in fully mechanized top-coal caving faceInternational Journal of Rock Mechanics and Mining Sciences, 2009
- Modelling of strata movement with a special reference to caving mechanism in thick seam coal miningInternational Journal of Coal Geology, 2006