A study of secondary instabilities in postbuckling composite aerostructures
Authors:
- 1 August 2007
- journal article
- research article
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 111 (1125) , 715-729
Abstract
A number of experimental studies have shown that postbuckling stiffened composite panels, loaded in uniaxial compression, may undergo secondary instabilities, characterised by an abrupt change in the buckled mode-shape of the skin between the supporting stiffeners. In this study high-speed digital speckle photogrammetry is used to gain further insight into an I-stiffened panel’s response during this transient phase. This energy-dissipating phenomenon will be shown to be able to cause catastrophic structural failure in vulnerable structures. It is therefore imperative that an accurate and reliable methodology is available to predict this phenomenon. The shortcomings of current non-linear implicit solution schemes, found in most commercially-available finite element codes, are discussed. A robust and efficient strategy, which utilises an automated quasi-static/pseudo-transient hybrid scheme, is presented in this paper and validated using a number of experimental tests. This approach is shown to be able to predict mode-jumping with good accuracy.Keywords
This publication has 18 references indexed in Scilit:
- An automated hybrid procedure for capturing mode-jumping in postbuckling composite stiffened structuresComposite Structures, 2006
- Capturing mode-switching in postbuckling composite panels using a modified explicit procedureComposite Structures, 2003
- The buckling mode extracted from the LDLT-decomposed large-order stiffness matrixCommunications in Numerical Methods in Engineering, 2002
- Numerical–experimental investigation on post-buckled stiffened composite panelsComposite Structures, 2002
- The behaviour of damage tolerant hat-stiffened composite panels loaded in uniaxial compressionComposites Part A: Applied Science and Manufacturing, 2001
- Postbuckling behaviour of a blade-stiffened composite panel loaded in uniaxial compressionComposites Part A: Applied Science and Manufacturing, 2000
- Buckling mode transition in hat-stiffened composite panels loaded in uniaxial compressionComposite Structures, 1997
- Postbuckling behavior of selected flat stiffened graphite-epoxy panels loaded in compressionAIAA Journal, 1985
- A fast incremental/iterative solution procedure that handles “snap-through”Computers & Structures, 1981
- Incremental displacement algorithms for nonlinear problemsInternational Journal for Numerical Methods in Engineering, 1979