Rheological Properties of Engine Oil with Nano-Additives Based on MoS2 Materials
Open Access
- 9 February 2022
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 12 (4) , 581
Abstract
To enhance oil’s tribological and rheological properties, various nano-additives are used. An example of such a nano-additive is nanosized molybdenum disulfide (MoS2). Due to its unique properties, MoS2-based materials used as lubricants have attracted significant attention. In our previous work, we developed a novel, scalable, and low-cost method for MoS2-based materials production using an impinging jet reactor. Hybrid nanostructures based on MoS2 and carbon nanomaterials (MoS2/CNMs) decreased the friction factor of the base oil. In the present study, a mathematical model that accounts for the viscous heating effects in rheograms was formulated. The model was used to interpret the results of rheological measurements conducted for the base oil 10W40 and its mixtures with different nanosized lubricant additives. The model of the non-isothermal Couette flow allowed us to correct the rheograms of the engine oils in the region of high shear rates where viscous heating effects become significant. The temperature correlations for the consistency and flow behavior indexes were proposed. The nanohybrid suspensions of MoS2 in the base oil were found to have the lowest apparent viscosity at low temperatures, typical for the cold engine startup.Keywords
Funding Information
- Narodowe Centrum Nauki (DEC-2017/27/B/ST8/01382)
This publication has 25 references indexed in Scilit:
- Modeling and experimental validation of subgrid scale scalar variance at high Schmidt numbersChemical Engineering Research and Design, 2017
- Molybdenum disulfide nanoparticles suspended in water-based nanofluids with mixed convection and flow inside a channel filled with saturated porous mediumAIP Conference Proceedings, 2016
- Automotive tribology overview of current advances and challenges for the futureTribology International, 2004
- The importance of the stribeck curve in the minimisation of engine friction1999
- Circular Couette flow of temperature-dependent materials: asymptotic solutions in the presence of viscous heatingChemical Engineering Science, 1997
- The temperature field in rotational rheometers and flow curve correction for viscous dissipationFlow, Turbulence and Combustion, 1985
- Temperature variations across the lubricant film in hydrodynamic lubricationFlow, Turbulence and Combustion, 1964
- Viscous heating in the cone-and-plate viscometer—IIChemical Engineering Science, 1963
- Thermal Conductivity of Heterogeneous Two-Component SystemsIndustrial & Engineering Chemistry Fundamentals, 1962
- Effect of Temperature Variations across the Lubricant Films in the Theory of Hydrodynamic LubricationJournal of Mechanical Engineering Science, 1960