Preparation of high‐modulus and high‐strength poly(ethylene terephthalate) film by zone‐annealing method
Authors:
- 5 February 1986
- journal article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 31 (2) , 429-439
Abstract
The zone‐annealing method was attempted to prepare high‐modulus and high‐strength poly(ethylene terephthalate) (PET) film. The film having Young′s modulus of 14.5 × 1010 dyn/cm2 and a tensile strength of 86.9 kg/mm2 in the drawing direction was obtained. These values correspond to four times those of a biaxial‐stretched PET film available commercially. The dyanmic viscoelastic properties also were measured. The dynamic storage modulus was 15.4 × 1010 dyn/cm2 at room temperature, and a high value of 3.6 × 1010 dyn/cm2 even at 200°C. The latter value is slightly higher than the room temperature modulus of the commercially available film. From the intensity and temperature position of α‐dispersion E″ peak, it was suggested that the amorphous chains in the zone‐annealed film was densely packed in a highly oriented state. Furthermore, the crystallinity, orientation, especially double orientation, and molecular chain conformation of the films in the zone‐annealing process are discussed in the present paper.Keywords
This publication has 9 references indexed in Scilit:
- Preparation of high‐modulus and high‐strength isotactic polypropylene fiber by zone‐annealing methodJournal of Applied Polymer Science, 1983
- Mechanical properties and superstructure of high-modulus and high-strength nylon-6 fibre prepared by the zone-annealing methodPolymer, 1982
- Preparation of high-modulus and high-strength nylon-6 fibre by the zone-annealing methodPolymer, 1982
- Zone-drawing/annealing MethodSen'i Gakkaishi, 1982
- Mechanical properties and superstructure of high‐modulus and high‐strength PET fiber prepared by zone annealingJournal of Applied Polymer Science, 1981
- Preparation of high-modulus and high-strength poly(ethylene terephthalate) fiber by zone annealingJournal of Applied Polymer Science, 1981
- Preparation of High Modulus and High Strength Fiber by Zone-annealing MethodSen'i Gakkaishi, 1980
- ORIENTATION BEHAVIOR OF THE AMORPHOUS REGION OF THE HEAT-TREATED POLYETHYLENE TELEPHTHALATE FILAMENT WITH HIGH ORIENTATIONSen'i Gakkaishi, 1966
- Molecular motions in polyethylene terephthalateJournal of Colloid Science, 1963