FPGA-based Architecture for a Low-Cost 3D Lidar Design and Implementation from Multiple Rotating 2D Lidars with ROS
- 1 October 2019
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
Three-dimensional representations and maps are the key behind self-driving vehicles and many types of advanced autonomous robots. Localization and mapping algorithms can achieve much higher levels of accuracy with dense 3D point clouds. However, the cost of a multiple-channel three-dimensional lidar with a 360°field of view is at least ten times the cost of an equivalent single-channel two-dimensional lidar. Therefore, while 3D lidars have become an essential component of self-driving vehicles, their cost has limited their integration and penetration within smaller robots. We present an FPGA-based 3D lidar built with multiple inexpensive RPLidar A1 2D lidars, which are rotated via a servo motor and their signals combined with an FPGA board. A C++ package for the Robot Operating System (ROS) has been written, which publishes a 3D point cloud. The mapping of points from the two-dimensional lidar output to the three-dimensional point cloud is done at the FPGA level, as well as continuous calibration of the motor speed and lidar orientation based on a built-in landmark recognition. This inexpensive design opens a wider range of possibilities for lower-end and smaller autonomous robots, which can be able to produce three-dimensional world representations. We demonstrate the possibilities of our design by mapping different environments.Keywords
This publication has 15 references indexed in Scilit:
- Multi-view 3D Object Detection Network for Autonomous Driving2017
- Obstacle detection using a 2D LIDAR system for an Autonomous Vehicle2017
- Vehicle Detection from 3D Lidar Using Fully Convolutional Network2016
- LOAM: Lidar Odometry and Mapping in Real-time2014
- Laser range finder model for autonomous navigation of a robot in a maize field using a particle filterComputers and Electronics in Agriculture, 2014
- Lost in translation (and rotation): Rapid extrinsic calibration for 2D and 3D LIDARs2012
- Design and development of a fast and precise low-cost 3D laser rangefinder2011
- Mapping the world in 3DNature Photonics, 2010
- 3D scene reconstruction based on a moving 2D laser range finder for service-robots2009
- Range-resolved pulsed and CWFM lidars: potential capabilities comparisonApplied Physics B, 2006