Effect of processing conditions on physical properties of 3‐aminophenoxyphthalonitrile/epoxy laminates
Authors:
- 29 July 2013
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 131 (1)
Abstract
To develop high performances of polymer composite laminates, differential scanning calorimetry and dynamic rheological analysis studies were conducted to show curing behaviors of 3‐aminophenoxyphthalonitrile/epoxy resin (3‐APN/EP) matrix and define cure parameters of manufacturing processes. Glass fiber reinforced 3‐APN/EP (GF/3‐APN/EP) composite laminates were successfully prepared through different processing conditions with three parameters such as pressures, temperatures, and time. Based on flexure tests, dynamic mechanical analysis, thermal gravimetric analysis, and scanning electron microscope, the complementary catalytic effect of the three processing parameters is investigated by studying mechanical behavior, thermomechanical behavior, thermal behavior, and fracture morphology of GF/3‐APN/EP laminates. The 50/50 GF/3‐APN/EP laminates showed a significant improvement in flexural strength, glass transition temperature (Tg), and thermal stability with favorable processing parameters. It was also found that the Tg and thermal stability were significantly improved by the postheated treatment method. The effect of manufacturing process provides a new and simple route for the polymer–matrix composites application, which indicates that the composites can be manufactured at low temperatures. But, they can be used in a high temperature environment. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 39746.Keywords
This publication has 30 references indexed in Scilit:
- Degradation and Healing Mechanisms of Carbon Fibers during the Catalytic Growth of Carbon Nanotubes on Their SurfacesACS Applied Materials & Interfaces, 2012
- Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sinteringComposites Science and Technology, 2011
- Design of thorn-like micro/nanofibers: fabrication and controlled morphology for engineered composite materials applicationsJournal of Materials Chemistry, 2011
- Effect of nanoparticles and nanofibers on Mode I fracture toughness of fiber glass reinforced polymeric matrix compositesMaterials Science and Engineering: B, 2010
- Mechanical properties of carbon fiber reinforced epoxy/clay nanocompositesComposites Science and Technology, 2008
- Morphology, dynamic mechanical and thermal studies on poly(styrene-co-acrylonitrile) modified epoxy resin/glass fibre compositesComposites Part A: Applied Science and Manufacturing, 2007
- Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced compositesComposites Part A: Applied Science and Manufacturing, 2005
- Evaluation of fiber surface treatment and toughening of thermoset matrix on the interfacial behaviour of carbon fiber-reinforced cyanate matrix compositesComposites Science and Technology, 2005
- The hygrothermal effect on the fatigue behavior of carbon fiber/ peek laminate composites (I)Journal of Polymer Research, 1994
- The influence of matrix microstructure on the mechanical properties of CFRC compositesCarbon, 1993