Plasma Enhanced Chemical Vapor Deposition on Particulate Solid‐State Materials for Improved Powder Processing
Open Access
- 6 May 2009
- journal article
- pse proceedings---full-paper
- Published by Wiley in Plasma Processes and Polymers
- Vol. 6 (S1) , S860-S863
Abstract
The surface of fine lactose powder particulates was modified by direct‐plasma exposure in a radio frequency (RF) discharge, in a mixture of oxygen and hexamethyldisiloxane (HMDSO) diluted in argon. Besides, the RF power (100–500 W) and the HMDSO flow rate (0–68 sccm) at constant oxygen‐to‐HMDSO flow rate ratio of 10 was varied in this study. Apart from the relatively high pressure of 2 mbar, the plasma process adopted is very much alike the plasma enhanced chemical vapor deposition of silica‐like material descending from the plasma‐chemical reaction of oxygen and HMDSO. With respect to the processability of powders in production lines to be solely gravity‐driven, as for instance in the event of dye‐filling, compression ratios (based on the powder bulk and mass density) were measured for solely gravity‐driven filling of a graduated glass. A jolting volumeter was used to provide the compressibility of the compacted powder bulk. Higher compressibility of about 20% (improvement rate) was found for both experimental series: variation of HMDSO flow rate and variation of the discharge power. In both cases, an enhancement of the flowability of the powder was found to cause the compressibility improvement.Keywords
Funding Information
- Claude & Giuliana Foundation
- Novarits Pharma AG
This publication has 6 references indexed in Scilit:
- Effect of Surface Free Energy on the Flowability of Lactose Powder Treated by PECVDPlasma Processes and Polymers, 2008
- Flowability Modification of Lactose Powder by Plasma Enhanced Chemical Vapor DepositionPlasma Processes and Polymers, 2007
- A Downer Reactor for Short-time Plasma Surface Modification of Polymer PowdersChemical Engineering & Technology, 2005
- Mechanism of glidants: Investigation of the effect of different colloidal silicon dioxide types on powder flow by atomic force and scanning electron microscopyJournal of Pharmaceutical Sciences, 2004
- Flow Properties of Highly Dispersed Powders at Very Small Consolidation StressesChemical Engineering & Technology, 2003
- Zur Fließfähigkeit von Schüttgütern – Definition und MeßverfahrenChemie Ingenieur Technik, 1995