Near-/Sub-Vth process, voltage, and temperature (PVT) sensors with dynamic voltage selection
Authors:
- 1 May 2013
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 02714302,p. 133-136
Abstract
A process, voltage and temperature (PVT) sensors with dynamic voltage selection are proposed for environmental management in the ultra-low voltage dynamic voltage and frequency scaling (DVFS) system. The process and voltage (PV) sensors initially monitor the process variation. With known process information, PV sensors can real-time provide voltage variation status. The temperature sensor has six temperature sensitive ring oscillators (TSROs) generating frequency proportional to temperature. It dynamically selects the proper TSRO to convert the frequency into digital readings according to voltage status provided by PV sensors. With known process and voltage information from PV sensors, a pure temperature measurement result can be obtained. The proposed PVT sensors are designed in TSMC 65nm CMOS technology. This work can be dynamically operated over an ultra-low voltage range from 0.25V to 0.5V. Only 2.3μW is consumed at 0.25V. They can achieve 0.15 C resolution and 50k samples/sec conversion rate.Keywords
This publication has 5 references indexed in Scilit:
- Fully on-chip temperature, process, and voltage sensors2010
- A Time-Domain SAR Smart Temperature Sensor With Curvature Compensation and a 3σ Inaccuracy of −0.4°C ∼ +0.6°C Over a 0°C to 90°C RangeIEEE Journal of Solid-State Circuits, 2010
- Technologies for Ultradynamic Voltage ScalingProceedings of the IEEE, 2010
- Digital Computation in Subthreshold Region for Ultralow-Power Operation: A Device–Circuit–Architecture Codesign PerspectiveProceedings of the IEEE, 2010
- A 366kS/s 400uW 0.0013mm2 frequency-to-digital converter based CMOS temperature sensor utilizing multiphase clock2009