A Simple Analysis for Obtaining Cutoff Wavenumbers of an Eccentric Circular Metallic Waveguide in Bipolar Coordinate System
- 17 January 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 67 (3) , 837-844
Abstract
This paper describes a simple analysis of the guided waves in an eccentric circular waveguide based on the bipolar coordinate system (BCS). The separation of the variable technique is used for the solution. The structure under study is an infinite perfect electric conductor (PEC) cylinder in the z-direction, which encloses eccentrically another infinite PEC cylinder. The modal analysis has been conducted using an analytical method, solving the TE and TM modes by the aid of electromagnetic formulation. Despite previous studies which mostly rely on numerical techniques or otherwise considering the dominant TEM mode, in this paper, the analytical solution is proposed for the electromagnetic fields which consequently lead to the characterization of the cutoff wavenumbers of higher order modes and explicit solution to electric and magnetic fields in BCS. The solution of the Helmholtz equation in BCS using the technique of separation of variables exhibits as a one of the contributions of this paper, and the validity range of the answer is discussed. The values of the cutoff wavenumbers for the first few modes are calculated and compared with the benchmark results. The precise correspondence of the obtained values with the proposed method with those of the previous studies and computer simulations, along with the high speed and simplicity in implementation, introduces the present method as an appropriate option for analyzing eccentric circular cylindrical structures.Keywords
This publication has 24 references indexed in Scilit:
- Higher-Order Modes in Circular Eccentric WaveguidesElectromagnetics, 2009
- A variational calculation of TE and TM cutoff wavenumbers in circular eccentric guides by conformal mappingMicrowave and Optical Technology Letters, 2001
- Analysis of metallic waveguides of a large class of cross sections using polynomial approximation and superquadric functionsIEEE Transactions on Microwave Theory and Techniques, 2001
- Cutoff frequencies of circular waveguide loaded with eccentric dielectric cylinderIEE Proceedings - Microwaves, Antennas and Propagation, 1997
- Analysis of dominant and higher order modes for transmission lines using parallel cylindersIEEE Transactions on Microwave Theory and Techniques, 1994
- Correct determination of TE and TM cutoff wavenumbers in transmission lines with circular outer conductors and eccentric circular inner conductorsIEEE Transactions on Microwave Theory and Techniques, 1991
- Cutoff Wavenumbers and Modes for Annular-Cross-Section Waveguide with Eccentric Inner Conductor of Small RadiusIEEE Transactions on Microwave Theory and Techniques, 1987
- Calculation of Cutoff Wavenumbers for TE and TM Modes in Tubular Lines with Offset Center Conductor (Short Paper)IEEE Transactions on Microwave Theory and Techniques, 1986
- Cutoff wave numbers of eccentric circular and concentric circular‐elliptic metallic wave guidesRadio Science, 1980
- TE and TM modes in transmission lines with circular outer conductor and eccentric circular inner conductorElectronics Letters, 1969