Neutron Diffraction Measurement and Numerical Simulation to Study the Effect of Repair Depth on Residual Stress in 316L Stainless Steel Repair Weld
- 1 August 2015
- journal article
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 137 (4) , 041406
Abstract
Welding is often used to repair the defects in pressure vessels and piping, but residual stresses are generated inevitably and have a great effect on structure integrity. According to the defect size, different repair depth will be carried out, which leads to different stress state. In this paper, the effect of repair depth on residual stress in 316L stainless steel repair weld has been studied by neutron diffraction measurement and finite element modeling (FEM). The results show that the residual stresses in the deep repair are larger than those in shallow repair weld, because the deep repair involves multipass welding and brings a serious work hardening. In the weld metal, the longitudinal stress has exceeded the yield stress, and increases slightly with the increase of repair depth. In contrast to the longitudinal stress, the transverse stress is more sensitive to the repair depth. With the increase of repair depth, the transverse stress increases and even exceeds the yield strength as the repair depth is 45% of the plate thickness. At the bottom surface of the plate and heat affected zone (HAZ), both the longitudinal and transverse stresses increase as the repair depth increases. It also shows that the mixed hardening model gives the best agreement with the measurement, while isotropic and kinematic hardening models cause an overestimation and underestimation, respectively. Therefore, the mixed hardening model is recommended for the prediction of residual stresses.Keywords
This publication has 13 references indexed in Scilit:
- Assessment of residual stress of welded structural steel plates with or without post weld rolling using the contour method and neutron diffractionJournal of Materials Processing Technology, 2013
- Experimental and numerical investigations of yield surface, texture, and deformation mechanisms in AA5754 over low to high temperatures and strain ratesInternational Journal of Plasticity, 2013
- Accurate prediction of residual stress in stainless steel weldsComputational Materials Science, 2012
- Finite element analysis of the effect of welding heat input and layer number on residual stress in repair welds for a stainless steel clad plateMaterials & Design (1980-2015), 2011
- Measurement and prediction of residual stress in a bead-on-plate weld benchmark specimenInternational Journal of Pressure Vessels and Piping, 2009
- Numerical implementation of a thermo-elastic?plastic constitutive equation in consideration of transformation plasticity in weldingInternational Journal of Plasticity, 2005
- Measurement of the residual stresses in a stainless steel pipe girth weld containing long and short repairsInternational Journal of Pressure Vessels and Piping, 2005
- Analysis of residual stresses at weld repairsInternational Journal of Pressure Vessels and Piping, 2005
- Numerical and experimental investigations on the residual stresses of the butt-welded jointsComputational Materials Science, 2004
- Thermal Stresses in a Submerged-Arc Welded Joint Considering Phase TransformationsJournal of Engineering Materials and Technology, 1978