Transverse and Longitudinal CTE Measurements of Carbon Fibers and their Impact on Interfacial Residual Stresses in Composites
Authors:
- 1 April 2006
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 40 (8) , 733-754
Abstract
In situ transmission electron microscopy (TEM) is utilized to evaluate the coefficients of thermal expansion (CTE) of two polyacrylonitrile (PAN) based (T1000 and IM7) and one pitch-based (P55) carbon fiber in the temperature range 20–1100 C. The transverse morphology of the fibers is studied using field emission scanning electron microscope and selected area diffraction (SAD) patterns in a TEM and is co-related to the fiber transverse CTE. The PAN-based IM7 and T1000 fibers revealed a transversely isotropic structure, which was consistent with their transverse CTE measurements. Even though the pitch-based P55 fiber revealed cylindrical orthotropy, it did not translate to orthotropy in the transverse CTE. Finite element models of unidirectional IM7/977 composite, utilizing the present IM7 CTE values, are compared to experimental lamina scale CTE results where good agreement was obtained for cool-down regime. The models also indicate that the Tresca stresses in the epoxy matrix at the fiber–matrix interface exceed the allowable strength at cryogenic regimes suggesting possible fiber–matrix debonding and transverse matrix cracking.Keywords
This publication has 20 references indexed in Scilit:
- Review Carbon fibers for compositesJournal of Materials Science, 2000
- High temperature thermal and mechanical properties of high tensile carbon single filamentsCarbon, 1996
- Three-dimensional finite element modeling of residual thermal stresses in graphite/aluminum compositesActa Metallurgica et Materialia, 1995
- Thermal residual microstress generation during the processing of unidirectional carbon fibre/epoxy resin composites: random fibre arraysComposites, 1994
- Longitudinal/radial thermal expansion and poisson ratio of some ceramic fibres as measured by transmission electron microscopyComposites Science and Technology, 1993
- High resolution scanning electron microscopy of PAN-based and pich-based carbon fibreJournal of Materials Science Letters, 1990
- Graphite Fibers and Filaments1988
- Sag method for the determination of coefficient of linear thermal expansion of carbon fibresCarbon, 1979
- Analysis of Properties of Fiber Composites With Anisotropic ConstituentsJournal of Applied Mechanics, 1979
- High‐performance carbon fibersPolymer Engineering & Science, 1975