Imparting Sensitization Resistance to an Al-5Mg Alloy via Neodymium Additions
Authors:
- R.K. GuptaR.K. Gupta
- Y. WangYWY. Wang
- R. ZhangR. Zhang
- N.L. SukimanNSN.L. Sukiman
- C.H.J. DaviesCDC.H.J. Davies
- N. BirbilisNBN. Birbilis
- 26 October 2012
- journal article
- research article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 69 (1) , 4-8
Abstract
Low-level Nd additions, up to 0.17 wt%, were added to Al-5Mg to explore the impact on the subsequent degree of sensitization. Following heat treatment at 150°C for 1 day and 7 days, nitric acid mass loss (NAMLT) tests revealed that additions of >0.11% Nd were effective at decreasing the amount of subsequent intergranular attack.Keywords
This publication has 20 references indexed in Scilit:
- Intergranular Corrosion Penetration in an Al-Mg Alloy as a Function of Electrochemical and Metallurgical ConditionsCorrosion, 2012
- Spreading of intergranular corrosion on the surface of sensitized Al-4.4Mg alloys: A general findingCorrosion Science, 2012
- Metastable pitting characteristics of aluminium alloys measured using current transients during potentiostatic polarisationElectrochimica Acta, 2012
- Electrochemical Characteristics of Intermetallic Phases in Aluminum AlloysJournal of the Electrochemical Society, 2005
- Stress Corrosion Cracking of Al-Mg and Mg-Al AlloysCorrosion, 2004
- The influence of hydrogen on the stress-corrosion cracking of low-strength Al-Mg alloysJOM, 2003
- Stress corrosion cracking of sensitized AA5083 (Al-4.5Mg-1.0Mn)Metallurgical and Materials Transactions A, 2001
- Role of Mg in the stress corrosion cracking of an Al-Mg alloyMetallurgical and Materials Transactions A, 2001
- The role of magnesium segregation in the intergranular stress corrosion cracking of aluminium alloysCorrosion Science, 1987
- Influence of Service Temperature on the Resistance of Wrought Aluminum-Magnesium Alloys to CorrosionCorrosion, 1959