Modification of biobased polyamide 56 to achieve ultra-toughening
Authors:
- 12 May 2021
- journal article
- research article
- Published by Taylor & Francis in Polymer-Plastics Technology and Materials
- Vol. 60 (14) , 1-20
Abstract
Biobased PA56 is an innovative type of biobased polyamide that is regarded as the most potential material to replace traditional petroleum-based polyamide. However, biobased PA56 exhibits poor notched impact strength, which limits its applications. Biobased PA56/poly(octene-co-ethylene) grafted glycidyl methacrylate (POE-g-GMA) composites were mixed through twin-screw extrusion in the toughener range of 0–25 wt% and subsequently investigated for their structural, crystallization behavior, thermal and mechanical properties. Consequently, a nearly seventeen-fold increase in the notched Izod impact strength is registered. The essential work of fracture (EWF) method is used for the determination of fracture toughness of toughened biobased PA56. GRAPHICAL ABSTRACTKeywords
This publication has 51 references indexed in Scilit:
- Investigation on the Polyamide 6/SEBS-g-MA/Organoclay Nanocomposites with Glycidyl Methacrylate as a CompatibilizerPolymer-Plastics Technology and Engineering, 2011
- Enhanced compatibility of PA6/POE blends by POE‐g‐MAH prepared through ultrasound‐assisted extrusionJournal of Applied Polymer Science, 2010
- Morphology and mechanical properties of polyamide 12 blends with styrene/ethylene–butylene/styrene rubbers with and without maleationJournal of Applied Polymer Science, 2005
- Rubber toughening of an amorphous polyamide by functionalized SEBS copolymers: morphology and Izod impact behaviorPolymer, 2004
- Comparison of lamellar crystal structure and morphology of nylon 46 and nylon 5Polymer, 2000
- Detection of rubber particle cavitation in toughened plastics using thermal contraction testsPolymer, 2000
- Crystal Structures of Nylon 5,6. A Model with Two Hydrogen Bond Directions for Nylons Derived from Odd DiaminesMacromolecules, 1998
- Microstructural processes of fracture of rubber-modified polyamidesPolymer, 1995
- Brittle-tough transition in nylon-rubber blends: effect of rubber concentration and particle sizePolymer, 1987
- The p‐phenylene linkage in linear high polymers: Some structure–property relationshipsJournal of Polymer Science, 1952