Analysis of the Influence of Structural Characteristics on the Tensile Properties of Fused Filament Fabricated ABS Polymer Using Central Composite Design
Open Access
- 28 December 2023
- journal article
- research article
- Published by MDPI AG in Applied Mechanics
- Vol. 5 (1) , 20-35
Abstract
This study presents an investigation of the effects of structural characteristics, such as the layer height, infill density, top/bottom layer line directions and infill pattern, on the structural efficiency of Acrylonitrile Butadiene Styrene (ABS)-based specimens. The Fused Filament Fabrication (FFF) technique was utilized for the specimen fabrication, and the Ultimate Tensile Strength (UTS) and Strength-to-Mass (S/M) ratio were examined. The tests were planned according to the Central Composite Design (CCD), and an empirical model for each response was developed, with respect to the applied factors and their interactions. The analysis revealed that the characteristics with the strongest influence on the UTS and the S/M ratio were the infill and the layer height, respectively. Moreover, it was observed that the honeycomb structure contributed to the highest UTS compared to the other patterns. Finally, an optimization analysis based on the desirability function was performed, highlighting the combination of a 0.3 mm layer, 21.81% and 76.36% infill, 0° direction and the honeycomb pattern as the optimal for maximizing both UTS and S/M ratio under different desirability.Keywords
This publication has 38 references indexed in Scilit:
- Study on flexural and tensile behavior of PLA, ABS and PLA-ABS materialsMaterials Today: Proceedings, 2021
- 3D FE Modelling of Machining Forces during AISI 4140 Hard TurningStrojniški vestnik - Journal of Mechanical Engineering, 2020
- FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and TreatmentsPolymers, 2020
- Infill pattern and density effects on the tensile properties of 3D printed PLA materialJournal of Physics: Conference Series, 2019
- Applications of 3D Printing in Food ProcessingFood Engineering Reviews, 2019
- Mechanical property of FDM printed ABS: influence of printing parametersThe International Journal of Advanced Manufacturing Technology, 2019
- Optimization parameter effects on the strength of 3D-printing process using Taguchi method2019
- Optimization of mechanical properties of printed acrylonitrile butadiene styrene using RSM designThe International Journal of Advanced Manufacturing Technology, 2018
- Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based MaterialsJournal of Failure Analysis and Prevention, 2014
- Degradation behavior and kinetic study of ABS polymerJournal of Thermal Analysis and Calorimetry, 2009