Effect of the initial state of a low-carbon steel on nanostructure formation during high-pressure torsion at high strains and pressures
Authors:
- 1 October 2006
- journal article
- Published by Pleiades Publishing Ltd in Russian Metallurgy (Metally)
- Vol. 2006 (5) , 445-452
Abstract
The formation of nanocrystalline (d < 100 nm) and submicrocrystalline (100 nm < d < 1000 nm) structures in 09G2S and 10G2FT steels has been studied during cold and warm severe plastic deformation (SPD) by torsion at a hydrostatic pressure and subsequent heating. The steels were subjected to SPD in two initial structural states: ferritic-pearlitic and martensitic (bainitic) states. SPD at room temperature results in the formation of a cellular oriented nanostructure with individual equiaxed nanograins. As the deformation temperature increases to 500°C, the fraction of a grain structure and the average grain size increase. In the case of the initial ferritic-pearlitic state, the average grain size in the 10G2FT steel after SPD is larger (95 nm at 20°C and 120 nm at 500°C) than in the case of the initial martensitic structure (65 nm at 20°C and 85 nm at 500°C). The grain size in the 09G2S steel is slightly smaller than in the 10G2FT steel after SPD in both initial states. The coherent-domain sizes determined by X-ray diffraction agree well with the structural-element sizes determined by electron microscopy in the samples subjected to SPD. In the temperature range 20–500°C, torsional SPD results in the formation of a partly nanocrystalline structure and significant hardening of the metal. In both steels, the microhardness increases significantly with respect to the initial state: 2.5–3 times in the case of the initial ferritic-pearlitic state and 1.5–2 times in the case of the martensitic state.Keywords
This publication has 13 references indexed in Scilit:
- Spheroidization of Low Carbon Steel Processed by Equal Channel Angular PressingMATERIALS TRANSACTIONS, 2003
- Processing of a low-carbon steel by equal-channel angular pressingActa Materialia, 2002
- A New Severe Plastic Deformation Method: Twist Extrusion2002
- WITHDRAWN: Effect of pressing temperature on microstructure and tensile behavior of low carbon steels processed by equal channel angular pressingMaterials Science and Engineering: A, 2002
- Grain refinement mechanism during equal-channel angular pressing of a low-carbon steelActa Materialia, 2001
- Microstructural evolution in a commercial low carbon steel by equal channel angular pressingActa Materialia, 2000
- Formation of Submicrocrystalline Structure in TiAl and Ti3Al intermetallics via Hot Working2000
- Grain refinement of a commercial 0.15%C steel by equal-channel angular pressingScripta Materialia, 1999
- Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) processActa Materialia, 1999
- Studies in Large Plastic Flow and Fracture1964