Soldering of Mg Joints Using Zn-Al Solders
Open Access
- 18 April 2018
- journal article
- research article
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 49 (7) , 2684-2691
Abstract
Magnesium has applications in the automotive and aerospace industries that can significantly contribute to greater fuel economy and environmental conservation. The Mg alloys used in the automotive industry could reduce mass by up to 70 pct, providing energy savings. However, alongside the advantages there are limitations and technological barriers to use Mg alloys. One of the advantages concerns phenomena occurring at the interface when joining materials investigated in this study, in regard to the effect of temperature and soldering time for pure Mg joints. Eutectic Zn-Al and Zn-Al alloys with 0.05 (wt pct) Li and 0.2 (wt pct) Na were used in the soldering process. The process was performed for 3, 5, and 8 minutes of contact, at temperatures of 425 °C, 450 °C, 475 °C, and 500 °C. Selected, solidified solder-substrate couples were cross-sectioned, and their interfacial microstructures were investigated by scanning electron microscopy. The experiment was designed to demonstrate the effect of time, temperature, and the addition of Li and Na on the kinetics of the dissolving Mg substrate. The addition of Li and Na to eutectic Zn-Al caused to improve mechanical properties. Higher temperatures led to reduced joint strength, which is caused by increased interfacial reaction.Keywords
This publication has 26 references indexed in Scilit:
- Microstructure characterization and tensile properties of Mg/Al dissimilar joints manufactured by thermo-compensated resistance spot welding with Zn interlayerMaterials & Design (1980-2015), 2015
- Essential Magnesium Alloys Binary Phase Diagrams and Their Thermochemical DataJournal of Materials, 2014
- Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applicationsActa Materialia, 2013
- Study on low temperature brazing of magnesium alloy to aluminum alloy using Sn–xZn soldersMaterials & Design (1980-2015), 2012
- The effects of the welding current on heat input, nugget geometry, and the mechanical and fractural properties of resistance spot welding on Mg/Al dissimilar materialsMaterials & Design (1980-2015), 2011
- Microstructure and interfacial reactions of soldering magnesium alloy AZ31BMaterials Characterization, 2010
- The effect of the adhesive on the microcracks in the laser welded bonding Mg to Al jointMaterials Science and Engineering: A, 2009
- Effect of Zn alloy interlayer on interface microstructure and strength of diffusion-bonded Mg–Al jointsScripta Materialia, 2008
- Magnesium and its alloys applications in automotive industryThe International Journal of Advanced Manufacturing Technology, 2007
- Recent magnesium alloy development for elevated temperature applicationsInternational Materials Reviews, 2004