Powder Composition Structurization of the Ti-25Al-25Nb (at.%) System upon Mechanical Activation and Subsequent Spark Plasma Sintering
Authors:
Open Access
- 25 March 2021
- journal article
- research article
- Published by Institute of Combustion Problems in Eurasian Chemico-Technological Journal
- Vol. 23 (1) , 37-44
Abstract
The results of a study of the microstructure evolution of pre-mechanically activated elementary powders based on the Ti-25Al-25Nb (at.%) compositions differing in the particle size of the aluminum (Al) component are presented. It was found that during the mechanical activation, most of the Al was dissolved in the Ti and Nb lattices by interpenetration with the formation of solid solutions (Ti, Al) and (Nb, Al). It has been established that an increase in temperature to 1400 °C, when sintering powder materials based on the Ti-Al-Nb system, leads to a sharp increase in the temperature of Al particles, as a result of the melting of which it is impossible to control the phase formation, which ultimately leads to the difficulty of obtaining the required product. It was determined that in the process of spark-plasma sintering of mechanically activated compositions, intermetallic compounds are formed based on phases ‒ α2, B2 and O, and with an increase in the sintering temperature, their morphology and distribution in the alloy volume change.Keywords
This publication has 24 references indexed in Scilit:
- An evolving energy solution: Intermediate hydrogen storageInternational Journal of Hydrogen Energy, 2018
- Effect of spark plasma sintering temperature on structure and phase composition of Ti-Al-Nb-based alloysMaterials Testing, 2017
- Fabrication of Intermetallic Titanium Alloy Based on Ti2AlNb by Rapid Quenching of MeltMetal Science and Heat Treatment, 2017
- Technology of Ti-Al-Nb Obtaining by Use of Spark Plasma Sintering MethodKey Engineering Materials, 2017
- Studying of 2D Titanium Carbide Structure by Raman Spectroscopy after Heat Treatment in Argon and Hydrogen AtmospheresEurasian Chemico-Technological Journal, 2017
- Microstructure and mechanical properties of a Ti−22Al−25Nb alloy fabricated from elemental powders by mechanical alloying and spark plasma sinteringJournal of Alloys and Compounds, 2017
- Microstructure and mechanical properties of Ti–22Al–25Nb alloy fabricated by elemental powder metallurgyMaterials Science and Engineering: A, 2016
- RECENT ADVANCES ON MICROSTRUCTURAL CONTROLLING AND HOT FORMING OF Ti 2 AlNb-BASED ALLOYSACTA METALLURGICA SINICA, 2013
- Characterisation of Orthorhombic (Ti25Al25Nb)/SiC Intermetallic Composites for Advanced Space ApplicationsMaterials Science Forum, 2003
- Structure of mechanically alloyed Ti-Al-Nb powdersMetallurgical and Materials Transactions A, 1995