Thin TiN coating on NiTi substrate through PVD method: Improvement of the wear resistance
Authors:
- 1 December 2023
- journal article
- research article
- Published by SAGE Publications in Tribology - Materials, Surfaces & Interfaces
- Vol. 17 (4) , 324-337
Abstract
The preparation of a thin hard coating is the main challenge in the coating of NiTi articles. To achieve a thin coating of titanium nitride (TiN) on NiTi substrate, physical vapour deposition (PVD) was proposed in this study. Deposition of TiN coating was carried out at the nitrogen flows of 0.79 and 0.93 Pa. Phase composition, thickness, porosity, adhesion strength, hardness, and tribological properties of the TiN coatings were evaluated. The adhesion of the coating to the substrate was acceptable. Increasing of the gas flow resulted in a higher thickness (1 μm), lower porosity and higher adhesion strength. On contrary, the samples prepared with the lower gas flow showed higher hardness and elastic modulus. The coated samples showed smaller width of wear, lower wear rate and lower friction coefficient in comparison to the substrate. The delamination and adhesive wear mechanisms govern the wear process.Keywords
Funding Information
- Materials and Energy Research Center (371397059)
This publication has 55 references indexed in Scilit:
- Erosion wear of CrN, TiN, CrAlN, and TiAlN PVD nitride coatingsInternational Journal of Refractory Metals and Hard Materials, 2012
- Titanium Nitride and Nitrogen Ion Implanted Coated Dental MaterialsCoatings, 2012
- The underlying biological mechanisms of biocompatibility differences between bare and TiN-coated NiTi alloysBiomedical Materials, 2011
- Tribological and oxidation behaviour of TiAlCN/VCN nanoscale multilayer coating deposited by the combined HIPIMS/(HIPIMS-UBM) techniqueSurface and Coatings Technology, 2011
- Surface characterization and mechanical property of TiN/Ti-coated NiTi alloy by PIIIDSurface and Coatings Technology, 2007
- Synthesis of TiC/NiTi composite particles by chemical reaction in molten saltsMaterials Science and Engineering: A, 2006
- Composite coatings of titanium-aluminum nitride for steel against corrosion induced by solid NaCl deposit and water vapor at 600 °CMaterials Research, 2004
- Biocorrosion and cytocompatibility assessment of NiTi shape memory alloysScripta Materialia, 2004
- Single layer and multilayer wear resistant coatings of (Ti,Al)N: a reviewMaterials Science and Engineering: A, 2003
- Adhesion of titanium nitride coatings on high-speed steelsJournal of Vacuum Science & Technology A, 1985