The Synergistic Effect of Dibenzyldithiocarbamate Based Accelerator on the Vulcanization and Performance of the Silica-Filled Styrene–Butadiene Elastomer
Open Access
Abstract
This work focused on studying the effect of dibenzyldithocarbamate vulcanization accelerator on the curing characteristics and performance of styrene–butadiene elastomer (SBR) filled with nanosized silica. A dibenzyldithocarbamate derivative was applied as an additional accelerator to enhance the efficiency and the rate of sulfur vulcanization in the presence of two other accelerators, i.e., N-cyclohexyl-2-benzothiazole sulfenamide (CBS) and/or 1,3-diphenylguanidine (DPG). Furthermore, the possibility of reducing the amount of zinc oxide (ZnO) and the elimination of CBS and DPG from elastomer compounds using dibenzyldithiocarbamate accelerator was tested. Dibenzyldithocarbamate derivative applied with other accelerators (especially CBS) effectively enhances the efficiency of SBR vulcanization by reducing the optimal vulcanization time and increasing the crosslink density of the vulcanizates despite the lower amount of ZnO. Moreover, vulcanizates with dibenzyldithocarbamate demonstrate higher tensile strength while having a smaller content of CBS or DPG compared to the reference SBR composites. Thus, the synergistic effect of dibenzydithiocarbamate derivative on the vulcanization and performance of SBR was confirmed. Furthermore, dibenzyldithocarbamate derivative enables the amount of ZnO to be reduced by 40% without harmful influence on the crosslink density and performance of the vulcanizates. Finally, it is possible to replace CBS with a dibenzyldithiocarbamate derivative without the crosslink density and tensile strength of the vulcanizates being adversely affected, while improving their resistance to thermo-oxidative aging.Keywords
This publication has 63 references indexed in Scilit:
- EFFECT OF ZINC DITHIOCARBAMATES AND THIAZOLE-BASED ACCELERATORS ON THE VULCANIZATION OF NATURAL RUBBERRubber Chemistry and Technology, 2012
- The Effect of Accelerators on Curing Characteristics and Properties of Natural Rubber/Chlorosulphonated Polyethylene Rubber BlendMaterials and Manufacturing Processes, 2009
- The influence of CB loading on thermal aging resistance of SBR and NBR rubber compounds under different aging temperatureMaterials & Design (1980-2015), 2009
- Influence of the cure systems on long time thermal aging behaviors of NR compositesMacromolecular Research, 2008
- Reinforcement of natural rubber with silica/carbon black hybrid fillerPolymer Testing, 2007
- Activity of fillers in elastomer networks of different structureMacromolecular Symposia, 2003
- Adsorption of curatives and activity of silica toward elastomersMacromolecular Symposia, 2003
- Analysis of Cure Characteristics on Cross-Link Density and Type, and Viscoelastic Properties of Natural RubberPolymer-Plastics Technology and Engineering, 1998
- Studies on cure synergism. I. Effect of safe zinc dithiocarbamates on NR vulcanization accelerated by thiazole‐based acceleratorsJournal of Applied Polymer Science, 1994
- EV Systems for NR. I. The Purpose of Efficient Vulcanization and Development of Curing SystemRubber Chemistry and Technology, 1969