Tin oxide cross-linking of chloroprene rubber
Open Access
- 1 March 2015
- journal article
- Published by LUKASIEWICZ Research Network - Industrial Chemistry Research Institute in Polimery
- Vol. 60 (03) , 186-191
Abstract
A new method of cross-linking chloroprene rubber (CR) with tin oxide (SnO) is presented. From the viewpoint of the mechanical properties, the optimal SnO contentis between 1 and 2 phr of CR (Table 1, Fig. 1), i.e. definitely less than the amount of ZnO and MgO typically used in CR cross-linking. CR vulcanizate cured with tin oxide demonstrates significantly higher tensile strength than CR cross-linked using a conventional mixture of ZnO and MgO. The determined values of equilibrium volume swelling and Mooney-Rivlin elasticity constants indicate a greater number of intermolecular cross-links. It was found that the incorporation of silica or carbon black into CR leads to an increase in the tensile strength of the vulcanizate crosslinked with 1 phr SnO (Table 2). Although the addition of kaolin to CR cured with SnO results in a slight decrease in the mechanical properties of vulcanizates, it causes a marked reduction of their flammability, as indicated by increase in the oxygen index value (Fig. 2).Keywords
This publication has 4 references indexed in Scilit:
- Nanostructured Magnesium Oxide as Cure Activator for Polychloroprene RubberJournal of Nanoscience and Nanotechnology, 2009
- Recent Developments in Crosslinking of ElastomersRubber Chemistry and Technology, 2005
- Polychloroprene RubberRubber Chemistry and Technology, 1976
- A Theory of Large Elastic DeformationJournal of Applied Physics, 1940