Enhancement of Wear Resistance on H13 Tool and Die Steels by Trace Nanoparticles
Open Access
Abstract
In order to improve the impact toughness and wear resistance of the tool and die steels, this study innovatively prepared strengthened H13 steels with different contents of single-phase TiC and dual-phase TiC + TiB2 through in situ nanoparticle/Al master alloys at room temperature. The microstructure evolution and mechanical properties as well as wear resistance were investigated. Results indicate that the H13 steel with 0.02 wt.% dual-phase TiC + TiB2 nanoparticles has a more uniform and finer microstructure, and the mechanical properties and wear resistance are significantly improved. The yield strength, maximum tensile strength, breaking strain, uniform elongation, product of strength plasticity, and unnotched and U-notched impact toughness of H13 steel with 0.02 wt.% dual-phase TiC + TiB2 are higher than that of H13 steel. In addition, the volume wear rate, maximum scratch depth and width reach 7.1 × 10−11 m3/m, 6050 nm and 90 μm, respectively, which are reduced by 44.5%, 30.1% and 45.5% compared with that of H13 steel. Refining the microstructure and improving impact toughness and wear resistance of H13 tool steel through trace nanoparticles can provide important inspiration for industrial applications.Keywords
This publication has 79 references indexed in Scilit:
- Roof filling control technology and application to mine roadway damage in small pit goafInternational Journal of Mining Science and Technology, 2019
- Simultaneously Enhanced Strength, Toughness and Ductility of Cast 40Cr Steels Strengthened by Trace Biphase TiCx-TiB2 NanoparticlesMetals, 2018
- Reinforcement in Al Matrix Composites: A Review of Strengthening Behavior of Nano‐Sized ParticlesAdvanced Engineering Materials, 2018
- Case study and design of steel set support for aged belt entry rehabilitationInternational Journal of Mining Science and Technology, 2018
- Effect of abrasive particle size on slurry abrasion resistance of austenitic and martensitic steelsWear, 2017
- Mechanical model for controlling floor heave in deep roadways with U-shaped steel closed supportInternational Journal of Mining Science and Technology, 2015
- Comparing the reinforcement capacity of welded steel mesh and a thin spray-on liner using large scale laboratory testsInternational Journal of Mining Science and Technology, 2014
- Solid state synthesis of nano-mineral particlesInternational Journal of Mining Science and Technology, 2012
- Effect of abrasive size on wear of metallic materials and its relationship with microchips morphology and wear micromechanisms: Part 1Wear, 2011
- Some remarks on particle size effects on the abrasion of a range of Fe based alloysTribology International, 2010