Deformation and failure mechanism of full seam chamber with extra-large section and its control technology
Authors:
Open Access
- 1 January 2020
- journal article
- research article
- Published by Walter de Gruyter GmbH in Open Geosciences
- Vol. 12 (1) , 390-405
Abstract
In order to effectively predict and control the rib spalling and roof leakage, it is necessary to reveal the deformation and failure mechanism of the chamber and propose the corresponding surrounding rock control technology. Based on uniaxial compression experiments and numerical simulations, it is concluded that coal body damage is dominated by shear failure during uniaxial compression, which indicates to some extent the main form of damage of the surrounding rock in the chamber. Then the combined finite and discrete element method is used to establish a numerical model to reveal the evolution law of fracture in the surrounding rock. The simulation results show that after the excavation of the chamber, a large amount of shear failure occurred in the ribs and the roof. Then those cracks further developed, expanded, penetrated, and finally connected with the surface of the chamber. Under the effect of the mine pressure, the coal body is separated from the surface of the chamber, leading to the occurrence of rib spalling and roof leakage. So it was given that support method by controlling crack development. The grouting and high-strength anchor bolt and anchor cable are proposed to improve the shear strength of the surrounding rock, which helps to reduce the occurrence of cracks, and inhibit the cracks from interpenetrating. An industrial test was carried out in the chamber of Tashan Coal Mine, which showed good control effect of the surrounding rock in the chamber.Keywords
This publication has 43 references indexed in Scilit:
- Numerical modelling of longwall mining and stability analysis of the gates in a coal mineInternational Journal of Rock Mechanics and Mining Sciences, 2012
- Numerical modelling of the effects of weak immediate roof lithology on coal mine roadway stabilityInternational Journal of Coal Geology, 2012
- ADECO full-face tunnel excavation of two 260m2 tubes in clays with sub-horizontal jet-grouting under minimal urban coverTunnelling and Underground Space Technology, 2011
- Fracture–fracture interaction during groutingTunnelling and Underground Space Technology, 2010
- Numerical simulation of stress distributions and displacements around an entry roadway with igneous intrusion and potential sources of seam gas emission of the Barapukuria coal mine, NW BangladeshInternational Journal of Coal Geology, 2009
- An improved penalty method for power-law Stokes problemsJournal of Computational and Applied Mathematics, 2009
- Determination of the most effective longwall equipment combination in longwall top coal caving (LTCC) method by simulation modellingInternational Journal of Rock Mechanics and Mining Sciences, 2008
- Quaternion‐based rigid body rotation integration algorithms for use in particle methodsInternational Journal for Numerical Methods in Engineering, 2007
- A New Penalty Method for Nonlinear ProgrammingComputers & Mathematics with Applications, 2006
- 3D numerical modeling of longwall mining with top-coal cavingInternational Journal of Rock Mechanics and Mining Sciences, 2005